User Manual
Table Of Contents
- English
- Introduction
- Preparations
- Basic Operation
- Advanced Operation
- SET MENU Items
- Operating the SET MENU
- 1. SPEAKER SET (1A. CENTER SP to 1G. MAIN LEVEL)
- 2. LOW FREQ. TEST
- 3. L/R BALANCE
- 4. HP TONE CTRL (Headphone Tone Control)
- 5. CENTER GEQ (Center Graphic Equalizer)
- 6. INPUT RENAME
- 7. I/O ASSIGN
- 8. INPUT MODE
- 9. PARAMETER INI (Parameter Initialization)
- 10. DOLBY D. SET (Dolby Digital Set)
- 11. DTS SET
- 12. 6.1/ES AUTO
- 13. SP DELAY TIME
- 14. DISPLAY SET
- 15. MEMORY GUARD
- Remote Control Features
- Adjusting the Levels of the Effect Speakers
- Setting the Sleep Timer
- SET MENU Items
- Additional Information
- Appendix
- Quick Reference Card
IntroductionPreparationsBasic Operation
Advanced
Operation
Additional
Information
Appendix
32
SET MENU Items
Operating the SET MENU
Adjustment should be performed with the remote control. Some items require extra steps to change to the desired setting.
1
1
Set PARAMETER/SET MENU to SET MENU.
2
2
Press h or g repeatedly to select an item from the table of SET MENU, then press + or – to enter the setting of that item.
• The last item you adjusted appears on the display.
• Some items have sub items.
3
3
Press + or – to change the setting of the item.
4
4
Press h or g repeatedly or a DSP program button to exit the SET MENU.
PARAMETER / SET MENU
Cursor buttons
SET MENU 1/4
1 SPEAKER SET
≥ 2 LOW FREQ.TEST
3 L/R BALANCE
4 HP TONE CTRL
OSD (On Screen Display)
Front Panel Display
2 LOW FREQ.TEST
≥ TEST TONE………OFF
OUTPUT…MAIN L/R
FREQ.………………88Hz
2 LOW FREQ.TEST
TEST TONE………OFF
or
2 LOW FREQ.TEST
-/+ : Enter