DSP-AX763_B-cv.
01EN_00_DSP-AX763_B.book Page i Thursday, January 31, 2008 9:41 AM CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
01EN_00_DSP-AX763_B.book Page 1 Thursday, January 31, 2008 9:41 AM Contents ADVANCED OPERATION Features ................................................................... 2 Advanced sound configurations...........................56 Supplied accessories .................................................. 2 Changing sound field parameter settings................. 56 Selecting decoders ................................................... 61 Notice ..........................................................
01EN_00_DSP-AX763_B.book Page 2 Thursday, January 31, 2008 9:41 AM FEATURES Features Built-in 7-channel power amplifier HDMI™ (High-Definition Multimedia Interface) ◆ Minimum RMS output power (20 Hz to 20 kHz, 0.06% THD, 8 Ω) Front: 95 W + 95 W Center: 95 W Surround: 95 W + 95 W Surround back: 95 W + 95 W ◆ HDMI interface for standard, enhanced or high-definition video as well as multi-channel digital audio based on HDMI version 1.3a (HDMI is licensed by HDMI Licensing LLC.
01EN_00_DSP-AX763_B.book Page 3 Thursday, January 31, 2008 9:41 AM Notice Notice • y indicates a tip for your operation. • Some operations can be performed by using either the buttons on the front panel or the ones on the remote control. In case the button names differ between the front panel and the remote control, the button name on the remote control is given in parentheses. • This manual is printed prior to production.
01EN_00_DSP-AX763_B.book Page 4 Thursday, January 31, 2008 9:41 AM GETTING STARTED Getting started ■ Installing batteries in the remote control 2 1 3 1 Press the part and slide the battery compartment cover off. 2 Insert the four supplied batteries (AAA, R03, UM-4) according to the polarity markings (+ and –) on the inside of the battery compartment. 3 Slide the cover back until it snaps into place.
01EN_00_DSP-AX763_B.book Page 5 Thursday, January 31, 2008 9:41 AM Quick start guide Quick start guide Video monitor Front right speaker Front left speaker Preparation: Check the items Subwoofer Surround right speaker Center speaker Surround back right speaker DVD player Prepare the following items. ❏ Speakers ❏ Front speakers ................................... x 2 ❏ Center speaker .................................. x 1 ❏ Surround speakers ............................
01EN_00_DSP-AX763_B.book Page 6 Thursday, January 31, 2008 9:41 AM Quick start guide Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. Step 1: Set up your speakers Front speakers and center speaker Place your speakers in the room and connect them to this unit.
01EN_00_DSP-AX763_B.book Page 7 Thursday, January 31, 2008 9:41 AM Quick start guide y Step 2: Connect your DVD player and other components VIDEO MONITOR OUT jack DVD DIGITAL INPUT COAXIAL jack AUDIO DVD VIDEO jack MULTI CH INPUT FRONT (8CH) CENTER PRE OUT SINGLE DOCK CENTER 3 VIDEO VIDEO L GND R PHONO CD IN MD/ OUT (PLAY) CD-R (REC) IN DTV/CBL DVD DVR OUT IN VCR OUT SUB SB (8CH) SURROUND WOOFER HDMI SURROUND FRONT 1 SUR.
01EN_00_DSP-AX763_B.book Page 8 Thursday, January 31, 2008 9:41 AM Quick start guide Step 3: Press SCENE 1 button Check the type of the connected speakers. If the speakers are 6 ohm speakers, set “SP IMP.” to “6ΩMIN” before using this unit (see page 27). 4 ohm speakers can be also used as the front speakers (see page 94). 1 2 Turn on the video monitor and then set the input source selector of the video monitor to this unit.
01EN_00_DSP-AX763_B.book Page 9 Thursday, January 31, 2008 9:41 AM Quick start guide ■ After using this unit... ■ Customizing the SCENE templates • Using various SCENE templates ☞ P. 36 • Creating your original SCENE templates ☞ P. 39 INTRODUCTION Press CSTANDBY/ON to set this unit to the standby mode. What do you want to do with this unit? ■ Using various input sources • Basic controls of this unit ☞ P. 41 • Using your iPod with this unit ☞ P. 52 • Using the Bluetooth components ☞ P.
01EN_00_DSP-AX763_B.book Page 10 Thursday, January 31, 2008 9:41 AM CONNECTIONS Connections Rear panel 1 2 AUDIO 3 MULTI CH INPUT FRONT (6CH) CENTER PRE OUT SINGLE 4 DOCK CENTER 5 VIDEO VIDEO L GND R PHONO CD IN MD/ OUT (PLAY) CD-R (REC) DVD IN DTV/CBL DVR OUT IN VCR OUT SUB SB (8CH) SURROUND WOOFER HDMI FRONT SURROUND SUR.
01EN_00_DSP-AX763_B.book Page 11 Thursday, January 31, 2008 9:41 AM Connections Placing speakers The speaker layout below shows the speaker setting we recommend. You can use it to enjoy the CINEMA DSP and multi-channel audio sources. ■ 7.1-channel speaker layout 7.1-channel speaker layout is highly recommended for playback the sound of high definition audio formats (Dolby TrueHD, DTS-HD Master Audio, etc.) as well as the conventional audio sources with sound field programs.
01EN_00_DSP-AX763_B.book Page 12 Thursday, January 31, 2008 9:41 AM Connections ■ 6.1-channel speaker layout ■ 5.1-channel speaker layout See page 14 for connection information. See page 14 for connection information. y y We recommend that you also add the presence speakers for the effect sounds of the CINEMA DSP sound field program. See page 13 for details. We recommend that you also add the presence speakers for the effect sounds of the CINEMA DSP sound field program. See page 13 for details.
01EN_00_DSP-AX763_B.book Page 13 Thursday, January 31, 2008 9:41 AM Connections ■ Using presence speakers The presence speakers supplement the sound from the front and surround back speakers with extra ambient effects produced by the sound field programs (see page 47). You can adjust the vertical position of dialogues with using the presence speakers (see page 57).
01EN_00_DSP-AX763_B.book Page 14 Thursday, January 31, 2008 9:41 AM Connections Connecting speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, this unit cannot reproduce the input sources accurately. Caution • Before connecting the speakers, make sure that the AC power plug is disconnected from the AC wall outlet. • Do not let the bare speaker wires touch each other or let them touch any metal part of this unit.
01EN_00_DSP-AX763_B.book Page 15 Thursday, January 31, 2008 9:41 AM Connections ■ For the 6.1-channel speaker setting Center speaker EXTRA SP terminals (see page 14) (optional) AUDIO N MD/ OUT LAY) CD-R (REC) D/CD-R 2 DVD MULTI CH INPUT FRONT (8CH) CENTER DTV/CBL CD 4 5 3 IN DTV/CBL DVD OPTICAL OUT DVR IN VCR PRE OUT SINGLE SUB SB (8CH) SURROUND WOOFER HDMI OUT FRONT SURROUND SUR.
01EN_00_DSP-AX763_B.book Page 16 Thursday, January 31, 2008 9:41 AM Connections ■ Connecting the speaker cable 1 Remove approximately 10 mm of insulation from the end of each speaker cable and then twist the exposed wires of the cable together to prevent short circuits. 10 mm 2 Loosen the knob. ■ Using bi-amplification connections Caution Remove the shorting bars or bridges of your speakers to separate the LPF (low pass filter) and HPF (high pass filter) crossovers.
01EN_00_DSP-AX763_B.book Page 17 Thursday, January 31, 2008 9:41 AM Connections Information on jacks and cable plugs Connect one of the type of the audio jack(s) and/or video jack(s) that your input components are equipped with.
01EN_00_DSP-AX763_B.book Page 18 Thursday, January 31, 2008 9:41 AM Connections Information on HDMI™ ■ HDMI signal compatibility Video signals This unit is compatible with the video signals of the following resolutions: Audio signals Audio signal types Audio signal formats Compatible media 2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Bluray Disc, HD DVD, etc. DSD 2/5.1ch, 2.8224 MHz, 1 bit SA-CD, etc.
01EN_00_DSP-AX763_B.
01EN_00_DSP-AX763_B.book Page 20 Thursday, January 31, 2008 9:41 AM Connections Connecting a TV monitor or projector • When you use the internal tuner of the TV as the input source, connect the digital or analog audio output jacks of the TV and digital or analog audio input jacks of this unit. Refer to “Connecting a set-top box” on page 22 for connecting information.
01EN_00_DSP-AX763_B.book Page 21 Thursday, January 31, 2008 9:41 AM Connections Connecting other components Make sure that this unit and other components are unplugged from the AC wall outlets. Notes • When “VIDEO CONV.” is set to “OFF” (see page 80), be sure to make the same type of video connections as those made for your TV (see page 20). For example, if you connected your TV to the VIDEO MONITOR OUT jack of this unit, connect your other components to the VIDEO jacks.
01EN_00_DSP-AX763_B.book Page 22 Thursday, January 31, 2008 9:41 AM Connections ■ Connecting a DVD recorder, PVR or VCR VCR S-video out Audio out S-video in Audio in R L R AUDIO Video in Video out L MULTI CH INPUT FRONT (8CH) CENTER PRE OUT SINGLE DOCK CENTER V V IN OUT S S VIDEO VIDEO L R PHONO CD IN MD/ OUT (PLAY) CD-R (REC) DVD IN DTV/CBL DVR OUT IN VCR SUB SB (8CH) SURROUND WOOFER HDMI OUT SURROUND FRONT 1 SUR.
01EN_00_DSP-AX763_B.book Page 23 Thursday, January 31, 2008 9:41 AM Connections ■ Connecting audio components Notes • To make a digital connection to a component other than the default component assigned to each the DIGITAL INPUT jack or the DIGITAL OUTPUT jack, select the corresponding setting for “OPTICAL OUT”, “OPTICAL IN”, or “COAXIAL IN” in “I/O ASSIGNMENT” (see page 76). • Connect your turntable to the GND terminal of this unit to reduce noise in the signal.
01EN_00_DSP-AX763_B.book Page 24 Thursday, January 31, 2008 9:41 AM Connections ■ Connecting an external amplifier This unit has more than enough power for any home use. However, if you want to add more power to the speaker output or if you want to use another amplifier, connect an external amplifier to the PRE OUT jacks. Each PRE OUT jack outputs the same channel signals as the corresponding SPEAKERS terminals.
01EN_00_DSP-AX763_B.book Page 25 Thursday, January 31, 2008 9:41 AM Connections ■ Connecting a multi-format player or an external decoder This unit is equipped with 6 additional input jacks (left and right FRONT, CENTER, left and right SURROUND and SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor or preamplifier.
01EN_00_DSP-AX763_B.book Page 26 Thursday, January 31, 2008 9:41 AM Connections ■ Using REMOTE OUT jack Connect the component which is the Yamaha product and have the capability of the SCENE control signals to the REMOTE OUT jack as follows. Using the VIDEO AUX jacks on the front panel Use the VIDEO AUX jacks on the front panel to connect a game console or a video camera to this unit. REMOTE OUT Caution Be sure to turn down the volume of this unit and other components before making connections.
01EN_00_DSP-AX763_B.book Page 27 Thursday, January 31, 2008 9:41 AM Connections Connecting the power cable MONITOR OUT C DVR Setting the speaker impedance Caution If you are to use 6 ohm speakers, set “SP IMP.” to “6ΩMIN” as follows BEFORE using this unit. 4 ohm speakers can be also used as the front speakers. AC OUTLET SWITCHED 100W MAX. 0.4A MAX. Make sure this unit turned off. See page 28 for details. 2 Press and hold DTONE CONTROL and then press CSTANDBY/ON to turn on this unit.
01EN_00_DSP-AX763_B.book Page 28 Thursday, January 31, 2008 9:41 AM Connections Turning this unit on and off ■ Turning on this unit Press CSTANDBY/ON (or EPOWER) to turn on this unit. y • When you turn on this unit, there will be delay for a few seconds before this unit can reproduce sound. • You can also turn on this unit by pressing JSCENE (or 4SCENE) buttons. ■ Set this unit to the standby mode Press CSTANDBY/ON (or DSTANDBY) to set this unit to the standby mode.
01EN_00_DSP-AX763_B.book Page 29 Thursday, January 31, 2008 9:41 AM Connections Front panel display 1 2 MULTI CH VCR 3 DVR q EX ADAPTIVE DRC MASTER AUDIO q DIGITAL PLUS HD 96 q TRUE HD ES 24 q PL x 4 V-AUX DOCK SP AB 5 DTV/CBL 6 DVD MD/CD-R ENHANCER 7 CD TUNER PHONO VOL. YPAO VIRTUAL SLEEP SILENT CINEMA 96/24 LFE L C R SL SB SR SBL SBR DSD 0 A B C D 1 HDMI indicator Lights up when the signal of the selected input source is input at the HDMI IN jacks (see page 18).
01EN_00_DSP-AX763_B.book Page 30 Thursday, January 31, 2008 9:41 AM Connections E Multi-information display Shows the name of the current sound field program and other information when adjusting or changing settings. F SLEEP indicator Lights up while the sleep timer is on (see page 46). Using the remote control The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.
01EN_00_DSP-AX763_B.book Page 31 Thursday, January 31, 2008 9:41 AM OPTIMIZING THE SPEAKER SETTING FOR YOUR LISTENING ROOM (YPAO) Optimizing the speaker setting for your listening room (YPAO) This unit employs the YPAO (Yamaha Parametric Room Acoustic Optimizer) technology which lets you avoid troublesome listening-based speaker setup and achieves highly accurate sound adjustments automatically.
01EN_00_DSP-AX763_B.book Page 32 Thursday, January 31, 2008 9:41 AM Optimizing the speaker setting for your listening room (YPAO) 4 Extra speaker assignment EXTRA SP ASSIGN Selects the function of the speakers connected to the EXTRA SP terminals. Choices: FRONT B, ZONE B, PRESENCE, NONE • When you use the alternative front speaker system (see page 42) Select “FRONT B”. • When you want to use another front speaker system in Zone B Select “ZONE B”.
01EN_00_DSP-AX763_B.book Page 33 Thursday, January 31, 2008 9:41 AM Optimizing the speaker setting for your listening room (YPAO) 7 Press 9n to select “START” and then press 9ENTER to start the setup procedure. The following message appears in the OSD. When this unit starts the automatic setup procedure, loud test tones are output at the speakers. For more accurate measurements, keep quiet and move to the wall where speakers are not around.
01EN_00_DSP-AX763_B.book Page 34 Thursday, January 31, 2008 9:41 AM Optimizing the speaker setting for your listening room (YPAO) 10 Notes Press 9ENTER to display the setup results in detail. • The distances displayed in the “DISTANCE” results may be longer than the actual distance depending on the characteristics of your subwoofer. • In the “EQ” results, different values may be set for the same frequency to provide finer adjustments. AUTO SETUP . RESULT SP : 3/4/0.1 DIST: 4.50/5.30m LVL : -9.0/+6.
01EN_00_DSP-AX763_B.book Page 35 Thursday, January 31, 2008 9:41 AM Optimizing the speaker setting for your listening room (YPAO) ■ If an error screen appears Press 9k / n / l / h to select “RETRY” or “EXIT” and then press 9ENTER. The following display is an example when “E-9:USER CANCEL” appears in the OSD. ■ If “WARNING” appears When this unit detects potential problems during the “AUTO SETUP” procedure, “WARNING” appears in the top result display.
01EN_00_DSP-AX763_B.book Page 36 Thursday, January 31, 2008 9:41 AM SELECTING THE SCENE TEMPLATES Selecting the SCENE templates This unit is equipped with 17 preset SCENE templates for various situations of using this unit.
01EN_00_DSP-AX763_B.
01EN_00_DSP-AX763_B.book Page 38 Thursday, January 31, 2008 9:41 AM Selecting the SCENE templates ■ Preset SCENE templates descriptions The illustrations of the SCENE button in the following table indicate the assigned SCENE buttons in the default setting. SCENE template Input source Playback mode DVD Viewing DVD* Features Straight DVD Movie Viewing DVD* MOVIE Sci-Fi Select this SCENE template when you play back movies on your DVD player.
01EN_00_DSP-AX763_B.book Page 39 Thursday, January 31, 2008 9:41 AM Selecting the SCENE templates Creating your original SCENE templates 3 You can create your original SCENE templates for each SCENE button. You can refer to the preset 17 SCENE templates to create the original SCENE templates. Select the desired SCENE template Create an original SCENE template Press 9k / n to select the desired parameter of the SCENE template and then 9l / h to select the desired value of the selected parameter.
01EN_00_DSP-AX763_B.book Page 40 Thursday, January 31, 2008 9:41 AM Selecting the SCENE templates Using the remote control for the SCENE feature ■ Controlling the input source components in the SCENE mode You can operate both this unit and the input source component by using the remote control. You must set the appropriate remote control code for each input source in advance (see page 84). Before performing the following operations, set the operation mode selector on the remote control to FSOURCE.
01EN_00_DSP-AX763_B.book Page 41 Thursday, January 31, 2008 9:41 AM PLAYBACK Playback Caution Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player before you play back a CD encoded in DTS.
01EN_00_DSP-AX763_B.book Page 42 Thursday, January 31, 2008 9:41 AM Playback Before performing the following operations, set the operation mode selector on the remote control to FAMP. Selecting the MULTI CH INPUT component Use this feature to select the component connected to the MULTI CH INPUT jacks (see page 25) as the input source. Selecting the front speaker set Use this feature to turn the front speaker system (FRONT A and/or FRONT B) on or off.
01EN_00_DSP-AX763_B.book Page 43 Thursday, January 31, 2008 9:41 AM Playback Before performing the following operations, set the operation mode selector on the remote control to FAMP. Selecting audio input jacks (AUDIO SELECT) This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch between input jacks when more than one input jack is assigned to the same input source.
01EN_00_DSP-AX763_B.book Page 44 Thursday, January 31, 2008 9:41 AM Playback Using your headphones Before performing the following operations, set the operation mode selector on the remote control to FAMP. Connect a pair of headphones with a stereo analog audio cable plug to the PHONES jack on the front panel. Playing video sources in the background of an audio source You can combine a video image from a video source with sound from an audio source.
01EN_00_DSP-AX763_B.book Page 45 Thursday, January 31, 2008 9:41 AM Playback Displaying the input source information You can display the audio and video information of the current input signal. 1 Set the operation mode selector to FAMP and then press HSET MENU on the remote control. The top “SET MENU” display appears in the OSD. SET MENU . ;AUTO SETUP ;MANUAL SETUP .
01EN_00_DSP-AX763_B.book Page 46 Thursday, January 31, 2008 9:41 AM Playback ■ Canceling the sleep timer Using the sleep timer Use this feature to automatically set this unit to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to the AC OUTLET (see page 27).
01EN_00_DSP-AX763_B.book Page 47 Thursday, January 31, 2008 9:41 AM SOUND FIELD PROGRAMS Sound field programs This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from almost any stereo or multi-channel sound source. This unit is also equipped with a Yamaha digital sound field processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.
01EN_00_DSP-AX763_B.book Page 48 Thursday, January 31, 2008 9:41 AM Sound field programs LIVE/CLUB Program Descriptions Cellar Club This program simulates a live house with a low ceiling and homey atmosphere. A realistic, live sound field features powerful sound as if the listener is in a row in front of a small stage. The Roxy Theatre This is the sound field of a rock music live house in Los Angeles, with approximately 460 seats. The listener’s virtual seat is at the center left of the hall.
01EN_00_DSP-AX763_B.book Page 49 Thursday, January 31, 2008 9:41 AM Sound field programs Program Descriptions Adventure This program is ideal for precisely reproducing the sound design of action and adventure movies. The sound field restrains reverberations but puts emphasis on reproducing a powerful space expanded widely to the left and right. The reproduced depth is also restrained relatively to ensure the separation between audio channels and the clarity of the sound.
01EN_00_DSP-AX763_B.book Page 50 Thursday, January 31, 2008 9:41 AM Sound field programs ■ Using sound field programs without surround speakers (Virtual CINEMA DSP) Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers. It creates virtual speakers to reproduce the natural sound field. When you set “SUR. L/R SP” to “NONE” (see page 69), Virtual CINEMA DSP activates automatically whenever you select a sound field program (see page 47).
01EN_00_DSP-AX763_B.book Page 51 Thursday, January 31, 2008 9:41 AM USING AUDIO FEATURES Using audio features Before performing the following operations, set the operation mode selector on the remote control to FAMP. Adjusting the speaker level You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MULTI CH INPUT jacks.
01EN_00_DSP-AX763_B.book Page 52 Thursday, January 31, 2008 9:41 AM USING IPOD™ Using iPod™ Once you have stationed your iPod in a Yamaha iPod universal dock (such as YDS-10, sold separately) connected to the DOCK terminal of this unit (see page 25), you can enjoy playback of your iPod using the supplied remote control. You can also use the Compressed Music Enhancer mode of this unit to improve the sound quality of the compression artifacts (such as the MP3 format) stored on your iPod (see page 49).
01EN_00_DSP-AX763_B.book Page 53 Thursday, January 31, 2008 9:41 AM Using iPod™ ■ Controlling iPod in the menu browse mode You can perform the advanced operations of your iPod using the supplied remote control with the aid of the OSD of this unit. You can browse the songs stored on your iPod in the OSD. Further, you can change or adjust settings for your iPod to suit your personal preferences.
01EN_00_DSP-AX763_B.book Page 54 Thursday, January 31, 2008 9:41 AM USING BLUETOOTH™ COMPONENTS Using Bluetooth™ components You can connect a Yamaha Bluetooth adapter (such as YBA-10, sold separately) to the DOCK terminal of this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between this unit and the Bluetooth component. You need to perform “pairing” the connected Bluetooth adapter and your Bluetooth component in advance.
01EN_00_DSP-AX763_B.book Page 55 Thursday, January 31, 2008 9:41 AM RECORDING Recording Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components. Caution The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in noise being recorded. Therefore, if you want to use this unit to record sources encoded in DTS, the following considerations and adjustments need to be made.
01EN_00_DSP-AX763_B.book Page 56 Thursday, January 31, 2008 9:41 AM ADVANCED SOUND CONFIGURATIONS Advanced sound configurations Changing sound field parameter settings You can enjoy good quality sound with the initial factory settings. Although you do not have to change the initial factory settings, you can change some of the parameters to better suit the input source or your listening room.
01EN_00_DSP-AX763_B.book Page 57 Thursday, January 31, 2008 9:41 AM Advanced sound configurations ■ Basic configuration of sound field programs Each sound field program has some parameters defining the characteristics of the program. To customize the selected sound field program, adjust “DSP LEVEL” and/ or “DIALG.LIFT” first, and then try other parameters. Adjusting the vertical dialogue position (DIALG.LIFT) Use this feature to adjust the vertical position of the dialogues in movies.
01EN_00_DSP-AX763_B.book Page 58 Thursday, January 31, 2008 9:41 AM Advanced sound configurations ■ Sound field parameters for the advanced configurations Use the following sound field parameters to customize sound field programs in detail. y To change sound field parameter settings, see page 56 for details. Sound field parameter INIT.DLY P.INIT.DLY S.INIT.DLY SB INI.DLY Features Initial delay. Presence, surround, and surround back sound field initial delay.
01EN_00_DSP-AX763_B.book Page 59 Thursday, January 31, 2008 9:41 AM Advanced sound configurations Sound field parameter ROOM SIZE P.ROOM SIZE S.ROOM SIZE SB ROOM SIZE Features Room size. Presence, surround, and surround back room size. Adjusts the apparent size of the surround sound field. The larger the value, the larger the surround sound field becomes.
01EN_00_DSP-AX763_B.book Page 60 Thursday, January 31, 2008 9:41 AM Advanced sound configurations Sound field parameter REV.TIME Features Reverberation time. Adjusts the amount of time taken for the dense, subsequent reverberation sound to decay by 60 dB at 1 kHz. This changes the apparent size of the acoustic environment over an extremely wide range. Set a longer reverberation time for “dead” sources and listening room environments, and a shorter time for “live” sources and listening room environments.
01EN_00_DSP-AX763_B.book Page 61 Thursday, January 31, 2008 9:41 AM Advanced sound configurations Sound field parameter DIRECT Features 2-channel stereo direct. Bypasses the decoders and the DSP processors of this unit for pure hi-fi stereo sound when playing 2-channel analog sources. (“2ch Stereo” only) Choices: AUTO, OFF y • Select “AUTO” to bypass the decoders, the DSP processors and the tone control circuitry only when “BASS” and “TREBLE” are set to 0 dB (see page 51).
01EN_00_DSP-AX763_B.book Page 62 Thursday, January 31, 2008 9:41 AM Advanced sound configurations ■ Decoder descriptions (SUR.) Decoder Descriptions Pro Logic Dolby Pro Logic processing for any sources. PLIIx Movie PLII Movie Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for movie sources. The Pro Logic IIx decoder is not available when “SUR.B L/R SP” is set to “NONE” (see page 69). PLIIx Music PLII Music Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for music sources.
01EN_00_DSP-AX763_B.book Page 63 Thursday, January 31, 2008 9:41 AM CUSTOMIZING THIS UNIT (MANUAL SETUP) Customizing this unit (MANUAL SETUP) You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. ■ Auto setup AUTO SETUP Use this feature to automatically adjust speaker and system parameters (see page 31).
01EN_00_DSP-AX763_B.book Page 64 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) Volume menu 2 VOLUME MENU Parameter Functions Page ADAPTIVE DRC Selects whether this unit automatically adjusts the dynamic range in conjunction with the volume level or not. 72 ADAPTIVE DSP LEVEL Selects whether this unit adjusts the DSP effect level automatically in conjunction with the volume level or not.
01EN_00_DSP-AX763_B.book Page 65 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) Input menu 4 INPUT MENU Note Some parameters described below may not be available for all input sources and some parameters are only available for specific input sources. Parameter Functions Page I/O ASSIGNMENT Assigns the input/output jacks according to the component to be used if the initial settings of this unit do not correspond to your needs.
01EN_00_DSP-AX763_B.book Page 66 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) Menu D)INIT. CONFIG E)HDMI SET Parameter Functions Page AUDIO SELECT Designates the default audio input jack select setting for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. 81 DECODER MODE Designates the default decoder mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. 81 EXTD SUR.
01EN_00_DSP-AX763_B.book Page 67 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) 4 Use the remote control to access and adjust each parameter. y • You can change the “SET MENU” parameters while this unit is reproducing sound. • If you press RPARAMETER during the “SET MENU” operation, the “SET MENU” operation is canceled. • Press 0RETURN to return to the previous menu level. 2 Set the operation mode selector to FAMP and then press HSET MENU to enter “SET MENU”.
01EN_00_DSP-AX763_B.book Page 68 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) 1 BASIC MENU Use this feature to manually adjust the basic speaker settings. Most of the “BASIC MENU” parameters are set automatically when you run the automatic setup. LFE/bass out LFE/BASS OUT Use this feature to select the speakers that output the LFE (low-frequency effect) and the low-frequency signals. A)SPEAKER SET LFE/BASS OUT 1 BASIC MENU .
01EN_00_DSP-AX763_B.book Page 69 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) Measure for the speaker size The woofer section of a speaker is – 16 cm (6.5 in) or larger: large – smaller than 16 cm (6.5 in): small Front speakers Surround left/right speakers SUR. L/R SP A)SPEAKER SET SUR. L/R SP FRONT SP NONE >SMALL LARGE A)SPEAKER SET FRONT SP Choice SMALL >LARGE Choice Descriptions LARGE Select this setting when the front speakers are large.
01EN_00_DSP-AX763_B.book Page 70 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) Bass cross over CROSS OVER Use this feature to select the crossover frequency of all the speakers set to “SML” (or “SMALL”) in “SPEAKER SET” (see page 68). All frequencies below the selected frequency will be sent to the subwoofer(s) or front speakers depending on the setting of “LFE/BASS OUT” in “SPEAKER SET” (see page 68).
01EN_00_DSP-AX763_B.book Page 71 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) ■ Speaker distance C)SP DISTANCE Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations.
01EN_00_DSP-AX763_B.book Page 72 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) 2 VOLUME MENU Use this menu to manually adjust the various volume settings. Adaptive DSP level ADAPTIVE DSP LEVEL Use this feature to make fine adjustments of the DSP effect level (see page 57) automatically in conjunction with the volume level. Choice 2 VOLUME MENU AUTO Adjusts the DSP effect level in conjunction with the volume level. OFF Does not adjust the DSP effect level automatically. .
01EN_00_DSP-AX763_B.book Page 73 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) Use this feature to adjust the audio parameters. 3 SOUND MENU . A)EQUALIZER B)LFE LEVEL C)DYNAMIC RANGE D)LIPSYNC E)EXTD SUR. Graphic equalizer GEQ Use this feature to match the tonal quality of the center, surround L/R and surround back L/R, and surround back speakers with that of the front L/R speakers. You can adjust 7 frequency bands (63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 16 kHz).
01EN_00_DSP-AX763_B.book Page 74 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) ■ Low-frequency effect level ■ Dynamic range C)DYNAMIC RANGE B)LFE LEVEL Use this feature to adjust the output level of the LFE (lowfrequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective when the input signal contains the LFE signal.
01EN_00_DSP-AX763_B.book Page 75 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) ■ Audio and video synchronization (lip sync) D)LIPSYNC Use this feature to adjust the audio and video synchronization. ■ Extended surround E)EXTD SUR. Use this feature to enjoy 6.1/7.1-channel playback for multi-channel sources using the Dolby Pro Logic IIx, Dolby Digital EX, or DTS-ES decoders by using the connected surround back speakers. D)LIPSYNC E)EXTD SUR. .
01EN_00_DSP-AX763_B.book Page 76 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) 4 INPUT MENU Use this menu to adjust the parameters of each input source. 1/2 p [ PHONO B) TUNER C) CD D) MD/CD-R E) DVD F) DTV/CBL G) V-AUX [ ]/[ ]: Up/Down [ENTER]: Enter 4 INPUT MENU . H) I) J) K) L) 2/2 DOCK BLUETOOTH DVR VCR MULTI CH [ ]/[ ]: Up/Down [ENTER]: Enter p .
01EN_00_DSP-AX763_B.book Page 77 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) Input rename INPUT RENAME Use this feature to change the name of the input source that appears in the OSD and in the front panel display. J)DVR Decoder mode DECODER MODE Use this feature to switch the decoder activation mode. When you select “DTS” and digital audio signals are input, this unit always activates the DTS decoder and only plays back the DTS digital audio signals. INPUT RENAME DVR .
01EN_00_DSP-AX763_B.book Page 78 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) To ensure security, a time limit of 8 minutes is set for the pairing operation. You are recommended to read and fully understand all the instructions before starting. 2 3 Press 9ENTER to start pairing. The connected Bluetooth adapter starts searching Bluetooth components. “Searching...” appears in the video monitor. y To cancel the pairing, press 0RETURN to exit from “START PAIRING”.
01EN_00_DSP-AX763_B.book Page 79 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) 5 OPTION MENU Use this menu to adjust the optional system parameters. Amplifier function OSD display time OSD-AMP Use this feature to set the amount of time to display the status information screen after you perform a certain operation. Choice 5 OPTION MENU . A)DISPLAY SET B)VIDEO SET C)MEMORY GUARD D)INIT. CONFIG E)HDMI SET ON Displays the OSD unceasingly during an operation.
01EN_00_DSP-AX763_B.book Page 80 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) ■ Video settings B)VIDEO SET ■ Memory guard C)MEMORY GUARD Note Use this feature to prevent accidental changes to sound field program parameter and other system settings. Use “VIDEO” of “INIT” in “ADVANCED SETUP” to set the parameters in “VIDEO SET” to the factory presets (see page 96). C)MEMORY GUARD >OFF ON B)VIDEO SET . VIDEO CONV.
01EN_00_DSP-AX763_B.book Page 81 Thursday, January 31, 2008 9:41 AM Customizing this unit (MANUAL SETUP) ■ Initial configuration D)INIT. CONFIG ■ HDMI set E)HDMI SET Use this feature to select the settings of the audio input jack select, active decoders and extended surround when you turn on this unit. Use this feature to select the component to play back HDMI audio signals. E)HDMI SET D)INIT. CONFIG S. AUDIO;;;DSP-AX763 . AUDIO SELECT;;AUTO DECODER MODE;;AUTO EXTD SUR.
01EN_00_DSP-AX763_B.book Page 82 Thursday, January 31, 2008 9:41 AM REMOTE CONTROL FEATURES Remote control features In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code for each input source (see page 84).
01EN_00_DSP-AX763_B.book Page 83 Thursday, January 31, 2008 9:41 AM Remote control features ■ Controlling other components Set the operation mode selector to FSOURCE to control other components selected with the input selector buttons (5). You must set the appropriate remote control code for each input source in advance (see page 84). The following table shows the function of each control button used to control other components assigned to each input selector button (5).
01EN_00_DSP-AX763_B.book Page 84 Thursday, January 31, 2008 9:41 AM Remote control features ■ Selecting a component to be controlled You can select a component to be controlled independently of the input source selected with the input selector buttons. Press 6SELECT k / n repeatedly to select the desired component. The name of the component to be controlled appears in the display window (6) on the remote control.
01EN_00_DSP-AX763_B.book Page 85 Thursday, January 31, 2008 9:41 AM Remote control features 2 Press and hold CLEARN for about 3 seconds using a ballpoint pen or similar object. The library name (e.g. L;DVD) and the name of the selected control area (e.g. DVD) appear alternately in the display window (6) on the remote control. 4 Press the numeric buttons (A) to enter the four-digit remote control code for the component you want to use.
01EN_00_DSP-AX763_B.book Page 86 Thursday, January 31, 2008 9:41 AM Remote control features Programming codes from other remote controls 2 TV POWER AV POWER B 3 STANDBY C 4 POWER SCENE PHONO MD/CD-R A CD 2 VCR 1 DVR DTV/CBL TUNER DVD V-AUX/DOCK SELECT You can program remote control codes from other remote controls.
01EN_00_DSP-AX763_B.book Page 87 Thursday, January 31, 2008 9:41 AM Remote control features 5 Press and hold the button you want to program on the other remote control until “OK” appears in the display window (6) on the remote control. “NG” appears in the display window (6) on the remote control if learning was unsuccessful. In this case, start over from step 4.
01EN_00_DSP-AX763_B.book Page 88 Thursday, January 31, 2008 9:41 AM Remote control features 3 Press 9k / n to select and enter a character. Pressing 9n changes the character as follows: A to Z, 1 to 9, 0, + (plus), – (hyphen), ; (semicolon), / (slash), and space. Pressing 9k changes the characters in reverse order. PRESET/CH ENTER A/B/C/D/E Macro programming features The macro programming feature makes it possible to perform a series of operations with the press of a single button.
01EN_00_DSP-AX763_B.
01EN_00_DSP-AX763_B.book Page 90 Thursday, January 31, 2008 9:41 AM Remote control features ■ Programming macro operations You can program your own macro and use the macro programming feature to transmit several remote control commands in sequence at the press of a button. Be sure to set up remote control codes or perform learning operations before programming the macro. Note “AGAIN” appears in the display window (6) if you press a button other than a macro button.
01EN_00_DSP-AX763_B.book Page 91 Thursday, January 31, 2008 9:41 AM Remote control features Clearing configurations 3 You can clear all changes made in each function set, such as learned functions, macros, renamed control area names and setup remote control ID. ■ Clearing function sets 1 CLEAR Set the operation mode selector to FAMP or FSOURCE and then press CCLEAR by using a ballpoint pen or similar object. “CLEAR” appears in the display window (6).
01EN_00_DSP-AX763_B.book Page 92 Thursday, January 31, 2008 9:41 AM Remote control features ■ Clearing a learned function You can clear the function learned for a certain button in each control area. 1 3 Set the operation mode selector to FAMP or FSOURCE and then press an input selector button (5) to select the control area containing the function you want to clear. The selected component name appears in the display window (6).
01EN_00_DSP-AX763_B.book Page 93 Thursday, January 31, 2008 9:41 AM Remote control features ■ Clearing a macro function You can clear the function programmed for a certain macro button. 1 2 Set the operation mode selector to FAMP or FSOURCE and then press CMACRO using a ballpoint pen or similar object. “MCR ?” appears in the display window (6) on the remote control. Press and hold CCLEAR using a ballpoint pen or similar object, then press the macro button you want to clear for about 3 seconds.
01EN_00_DSP-AX763_B.book Page 94 Thursday, January 31, 2008 9:41 AM ADVANCED SETUP Advanced setup This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
01EN_00_DSP-AX763_B.book Page 95 Thursday, January 31, 2008 9:41 AM Advanced setup See page 94 for the operation of the advanced setup. 4 ■ Remote control AMP ID REMOTE AMP Use this feature to set the AMP ID of this unit for remote control recognition. This feature is useful when you operate this unit and the other Yamaha receivers/ amplifiers in the same room separately. Choices: ID1, ID2 • Select “ID1” when the remote control AMP ID code is set to “2201”.
01EN_00_DSP-AX763_B.book Page 96 Thursday, January 31, 2008 9:41 AM Advanced setup See page 94 for the operation of the advanced setup. ■ Bi-amplifier setting BI-AMP Use this feature to activate or deactivate the bi-amplifier function (see page 16). Choices: ON, OFF • Select “ON” if you want to activate the bi-amplifier function. “SUR.B L/R SP” is set to “NONE” automatically, and this unit outputs the front channel audio signals at the SURROUND BACK/BI-AMP speaker terminals.
01EN_00_DSP-AX763_B.book Page 97 Thursday, January 31, 2008 9:41 AM TROUBLESHOOTING Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. ■ General Problem This unit fails to turn on or enters the standby mode soon after the power is turned on. No sound.
01EN_00_DSP-AX763_B.book Page 98 Thursday, January 31, 2008 9:41 AM Troubleshooting Problem Cause Remedy See page Only the center speaker outputs substantial sound. When playing a monaural source with a sound field program, the source signal is directed to the center channel, and the front and surround speakers output effect sounds. No sound is heard from the center speaker. “CENTER SP” in “SET MENU” is set to “NONE”. Set “CENTER SP” to “SMALL” or “LARGE”.
01EN_00_DSP-AX763_B.book Page 99 Thursday, January 31, 2008 9:41 AM Troubleshooting Problem Cause Remedy See page The sound effects cannot be recorded. It is not possible to record the sound effects with a recording component. A source cannot be recorded by a digital recording component connected to the DIGITAL OUTPUT jack. The source component is not connected to the DIGITAL INPUT jacks of this unit. A source cannot be recorded by an analog component connected to the AUDIO OUT (REC) jacks.
01EN_00_DSP-AX763_B.book Page 100 Thursday, January 31, 2008 9:41 AM Troubleshooting ■ Remote control Problem The remote control does not work or function properly. The remote control does not learn new functions. 100 En Cause Remedy See page Wrong distance or angle. The remote control will function within a maximum range of 6 m and no more than 30 degrees off-axis from the front panel. 30 Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.
01EN_00_DSP-AX763_B.book Page 101 Thursday, January 31, 2008 9:41 AM Troubleshooting ■ iPod Note In case of a transmission error without a status message appearing in the front panel and in the OSD, check the connection to your iPod (see page 25). Status message Loading... Cause Remedy See page This unit is in the middle of recognizing the connection with your iPod. This unit is in the middle of acquiring song lists from your iPod.
01EN_00_DSP-AX763_B.book Page 102 Thursday, January 31, 2008 9:41 AM Troubleshooting ■ AUTO SETUP Before AUTO SETUP Error message Cause Remedy See page Connect MIC! Optimizer microphone is not connected. Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel. 31 Unplug HP! Memory Guard! Headphones are connected. Unplug the headphones. — The parameters of this unit are protected. Set “MEMORY GUARD” to “OFF”.
01EN_00_DSP-AX763_B.book Page 103 Thursday, January 31, 2008 9:41 AM Troubleshooting After AUTO SETUP Warning message Cause Remedy See page W-1:OUT OF PHASE Speaker polarity is not correct. This message may appear depending on the speakers even when the speakers are connected correctly. Check the speaker connections for proper polarity (+ or –). 14 W-2:OVER 24m (80ft) The distance between the speaker and the listening position is over 24 m (80 ft).
01EN_00_DSP-AX763_B.book Page 104 Thursday, January 31, 2008 9:41 AM RESETTING THE SYSTEM Resetting the system Use this feature to reset all the parameters of this unit to the initial factory settings. Notes • This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. • The initial factory settings are activated next time you turn on this unit. y To cancel the initialization procedure at any time without making any changes, press CSTANDBY/ON on the front panel.
01EN_00_DSP-AX763_B.book Page 105 Thursday, January 31, 2008 9:41 AM GLOSSARY Glossary ■ Audio and video synchronization (lip sync) Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem and a capability of maintaining audio and video signals synchronized during post-production and transmission. Whereas the audio and video latency requires complex end-user adjustments, HDMI version 1.
01EN_00_DSP-AX763_B.book Page 106 Thursday, January 31, 2008 9:41 AM Glossary ■ Dolby Surround ■ DTS Express Dolby Surround uses a 4-channel analog recording system to reproduce realistic and dynamic sound effects: 2 front left and right channels (stereo), a center channel for dialog (monaural), and a surround channel for special sound effects (monaural). The surround channel reproduces sound within a narrow frequency range.
01EN_00_DSP-AX763_B.book Page 107 Thursday, January 31, 2008 9:41 AM Glossary ■ LFE 0.1 channel ■ “x.v.Color” This channel reproduces low-frequency signals. The frequency range of this channel is from 20 Hz to 120 Hz. This channel is counted as 0.1 because it only enforces a low-frequency range compared to the full-range reproduced by the other 5/6 channels in Dolby Digital or DTS 5.1/6.1-channel systems. A color space standard supported by HDMI version 1.3.
01EN_00_DSP-AX763_B.book Page 108 Thursday, January 31, 2008 9:41 AM SOUND FIELD PROGRAM INFORMATION Sound field program information ■ Elements of a sound field ■ SILENT CINEMA What really creates the rich, full tones of a live instrument are the multiple reflections from the walls of the room. In addition to making the sound live, these reflections enable us to tell where the player is situated as well as the size and shape of the room in which we are sitting.
01EN_00_DSP-AX763_B.book Page 109 Thursday, January 31, 2008 9:41 AM SPECIFICATIONS Specifications AUDIO SECTION • Volume Control ...................................... MUTE/–80 dB to 16.5 dB • Minimum RMS Output Power for Front, Center, Surround, Surround back 20 Hz to 20 kHz, 0.06% THD, 8 Ω ...................................... 95 W • Tone Control (Front L/R) BASS Boost/Cut ...................................................... ±10 dB/50 Hz BASS Turnover Frequency ...................................
01EN_00_DSP-AX763_B.book Page 110 Thursday, January 31, 2008 9:41 AM INDEX Index ■ Numerics 1 BASIC MENU, Manual setup .......... 63 2 VOLUME MENU, Manual setup ..... 64 2ch STEREO, Sound field program .... 49 3 SOUND MENU, Manual setup ........ 64 4 INPUT MENU, Manual setup .......... 65 5 OPTION MENU, Manual setup ....... 65 7ch Enhancer, Sound field program .... 49 7ch STEREO, Sound field program .... 49 96/24 indicator ..................................... 29 ■ A A)DISPLAY SET, Option menu ......
01EN_00_DSP-AX763_B.book Page 111 Thursday, January 31, 2008 9:41 AM Index ■ F FL SCROLL, Display settings ............. 79 FLAG, Audio information ................... 45 FORMAT, Audio information ............. 45 Front panel display ............................... 29 Front panel display scroll, Display settings ................................ 79 FRONT PRE OUT jack connection ..... 24 FRONT SP, Speaker settings ............... 69 Front speaker set selection ...................
01EN_00_DSP-AX763_B.book Page 112 Thursday, January 31, 2008 9:41 AM Index Number of speakers, Auto setup result .............................. 33 ■ O Operation mode selector ...................... 30 OPTIMIZER MIC jack ........................ 31 Optimizing the speaker setting for your listening room .......................... 31 OPTION MENU, Manual setup .......... 79 Option menu, Manual setup ................. 65 OPTN, Remote control ........................ 84 OSD SHIFT, Display settings ..........
01EN_00_DSP-AX763_B.book Page 113 Thursday, January 31, 2008 9:41 AM Index Surround decode mode ........................ 61 Surround left speaker level, Sound field parameter ...................... 61 Surround left/right speakers, Speaker settings ............................... 69 SURROUND PRE OUT jack connection ................................ 24 Surround right speaker level, Sound field parameter ...................... 61 Surround sound field initial delay, Sound field parameter ......................
01EN_00_DSP-AX763_B.book Page 114 Thursday, January 31, 2008 9:41 AM Limited Guarantee for European Economic Area (EEA) and Switzerland Thank you for having chosen a Yamaha product. In the unlikely event that your Yamaha product needs guarantee service, please contact the dealer from whom it was purchased. If you experience any difficulty, please contact Yamaha representative office in your country. You can find full details on our website (http://www.yamaha-hifi.com/ or http://www.yamaha-uk.com/ for U.K.
01EN_00_DSP-AX763_B.
01EN_00_DSP-AX763_B.
01EN_00_DSP-AX763_B.
01EN_00_DSP-AX763_B.
01EN_00_DSP-AX763_B.
01EN_00_DSP-AX763_B.
DSP-AX763_B-cv.
00_cd_DSP-AX863SE-AX763_B.book Page 1 Monday, January 21, 2008 4:18 PM B DSP-AX863SE/DSP-AX763 The circled numbers and alphabets correspond to those in the Owner’s Manual. ■ Front panel A B VOLUME SPEAKERS SCENE 1 2 3 4 PROGRAM PHONES INPUT TONE CONTROL STRAIGHT PURE DIRECT AUDIO SELECT VIDEO AUX OPTIMIZER MIC STANDBY /ON SILENT CINEMA C Black process 45.0° 240.
00_cd_DSP-AX863SE-AX763_B.