Owner's Manual

OPERATION MODES OF FRONT PANEL CONTROLS
127 En
ADDITIONAL
INFORMATION
If you perform a mode trigger operation using the front panel controls, this unit enters the following mode. In each mode,
you can use the front panel controls as shown below. If no operation is performed for five seconds in each mode, this unit
automatically returns to the default mode.
Available operations in each mode
* In the BT pairing mode, this unit searches for Bluetooth components to be paired. This mode is available only when “DOCK” is
selected as an input source and a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) is connected to the
DOCK terminal of this unit.
Operation modes of front panel controls
Mode trigger button Mode to enter
—
Default mode
Press CAUDIO SELECT/REC OUT.
Audio select mode
Press and hold CAUDIO SELECT/REC OUT.
Rec out mode
Press CMENU.
GUI menu mode
Press CTONE CONTROL.
Tone control/speaker level mode
Press and hold DENTER.
BT pairing mode
Press ELEVEL –/+.
Speaker level mode
Mode
CAUDIO
SELECT/REC
OUT
CMENU
CTONE
CONTROL
DENTER ELEVEL –/+
JPROGRAM
selector
Default
to Audio select
mode
to GUI menu
mode
to Tone control/
speaker level
mode
—
to Speaker level
mode
Select a sound
field programs
(page 45)
Audio select
to default mode
to GUI menu
mode
to Tone control/
speaker level
mode
—
to Speaker level
mode
Select an audio
input jack
(page 42)
Rec out
to default mode
to GUI menu
mode
to Tone control/
speaker level
mode
—
to Speaker level
mode
Select a recording
source (page 54)
GUI menu
Left cursor to default mode Right cursor
Confirm the
selection in the
GUI menu
(page 67)
to Speaker level
mode
Menu up/down
Tone control/
speaker level
to Audio select
mode
to GUI menu
mode
Select a parameter
for adjustment
(page 53)
Select a speaker
for level
adjustment
(page 54)
Adjust the speaker
level
Adjust parameters
BT pairing*
—
to GUI menu
mode (the pairing
process continues)
—
to default mode
(the pairing
process continues)
to Speaker level
mode
Select a sound
field program
Note