Owner's Manual

86 En
Graphical user interface (GUI) menu
• The video conversion function does not work for the
COMPONENT VIDEO (MONITOR OUT/ZONE OUT) jacks
if “Component Assign” is set to “Zone2”, “Zone3”, or “Zone4”.
• The COMPONENT VIDEO (MONITOR OUT/ZONE OUT)
jacks do not output OSD signals.
■ Party Mode Set (Party mode settings)
The party mode enables you to play the same source in
multiple zones simultaneously (page 112). Use this
feature to enable or disable the party mode in each zone.
Target: Zone2/Target: Zone3/Target: Zone4
(Party mode target zone setting)
■ Zone2 Set/Zone3 Set
(Zone 2/Zone 3 settings)
Zone2 Volume/Zone3 Volume
(Zone 2/Zone 3 volume)
Use this menu to select whether this unit controls the
volume level of the audio signals output at the ZONE
OUT (ZONE 2 or ZONE 3) jacks.
When “Zone2 Volume” or “Zone3 Volume” is set to “Fixed”,
you cannot select the following parameters:
– Zone2 Max Vol./Zone3 Max Vol.
– Zone2 Initial Vol./Zone3 Initial Vol.
Zone2 Max Vol./Zone3 Max Vol.
(Zone 2/Zone 3 Maximum volume setting)
Use this feature to set the maximum volume level in the
Zone 2 or Zone 3.
Control range: –30.0 dB to +15 .0 dB, +16.5 dB
Control step: 5.0 dB
The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes
priority over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.”
setting.
Zone2 Initial Vol./Zone3 Initial Vol.
(Zone 2/Zone 3 initial volume setting)
Use this feature to set the volume level of Zone 2 or Zone
3 when the power of each zone is turned on.
Control range: Off, Mute, –80.0 dB to +16.5 dB
Control step: 0.5 dB
The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes
priority over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.”
setting.
Zone2 Balance/Zone3 Balance
(Zone 2/Zone 3 balance)
Use this feature to adjust the balance of the volume of the
left and right channels in each zone.
Choices: L10 to L1, 0, R1 to R10
Zone2 Tone Control/Zone3 Tone Control
(Zone 2/Zone 3 tone control)
Use this feature to adjust the balance of bass and treble
output to the selected zone.
Choices: Bass (Bass control), Treble (Treble control)
Control range: –10.0 dB to +10.0 dB
Initial setting: 0.0 dB
Zone2 Mono/Zone3 Mono
(Zone 2/Zone 3 monaural mode)
Use this feature to select whether you play back sources
monaurally in the selected zone.
Zone3
Select this setting when you want to connect the
video monitor in the Zone 3 to the
COMPONENT VIDEO (MONITOR OUT/
ZONE OUT) jacks.
Zone4
Select this setting when you want to connect the
video monitor in the Zone 4 to the
COMPONENT VIDEO (MONITOR OUT/
ZONE OUT) jacks.
Notes
Choice Descriptions
Disable
Select this setting to exclude the selected zone
from the party mode coverage. You can select
the input source of the selected zone
independently even if this unit is in the party
mode.
Enable
Select this setting to include the selected zone to
the party mode coverage.
Choice Descriptions
Fixed
Select this setting when you want to control the
volume level of the selected zone on the external
amplifier. This unit fixes the ZONE OUT
(ZONE 2 or ZONE 3) volume level to a standard
line level.
Variable
Select this setting when you want to control the
volume level of the selected zone on this unit.
You can adjust the ZONE OUT (ZONE 2 or
ZONE 3) volume level simultaneously with
J
VOLUME +/– on the remote control.
Note
Note
Note
Choice Descriptions
Off
Turns off the monaural playback mode. This
unit plays back sources in stereo.
On
Turns on the monaural playback mode. This unit
mixes down the left and right channel signals
and plays the sources monaurally.