Owner's Manual

92 En
Saving and recalling the system settings (System Memory)
3 Press 9k / n repeatedly to select the desired
memory number and then press 9h.
4 Press 9k / n / l / h to select a character or
function and then press 9ENTER to
confirm the selection.
Repeat step 4 until you input a name you want to use.
5 Press 9k / n / l / h to select “SAVE” and
then press 9ENTER.
y
To reset the name, select “RESET” and then press 9ENTER.
To cancel the operation without change, select “CANCEL” and
then press 9ENTER.
6 Press IMENU to turn off the GUI menu.
If you change the language setting (page 90 or 115), names of
the memory settings will be automatically reset.
Parameters to be saved
The parameter groups indicated in bold are selected by
default.
Main zone parameters
Zone 2, Zone 3 and Zone 4 parameters
For zone 4, only the input source setting is saved.
If you load the system settings, the settings currently configured
are overwritten. If you do not want to erase the current settings,
save the settings using the System Memory feature in advance.
Loading by the
7
SYSTEM MEMORY
buttons
You can recall the system settings stored in “Memory1” to
“Memory4” by pressing the corresponding 7SYSTEM
MEMORY buttons.
Note
Group Parameters Page
Input/HDMI
Out
Audio Select
73
Decoder Mode
73
Input source 41
HDMI OUT SEL
42
Audio Stereo/Surround
68
PURE DIRECT on/off 53
EXTD SUR. setting 53
Adaptive DRC
77
Adaptive DSP Level
77
LFE Level
78
Dynamic Range
78
Tone Control
80
Pure Direct
81
CINEMA DSP 3D mode on/off 51
Volume Volume level
41
SP Config Parametric EQ
79
Configuration
75
Distance
76
Level
77
Information (Auto Setup)
39
Setup Menu (Auto Setup)
34
Video/
Display Set
Analog ` Analog
81
Analog ` HDMI
82
HDMI ` HDMI
82
Processing
82
Short Message
88
Playback Screen
88
Position
88
Wall Paper
88
Others Lipsync
80
Front Panel Display
88
Audio Output
84
Parameter Descriptions Page
Input
Input source
110
Vo l u m e
Volume level
110
Tone Control
Tone control settings
111
Note
Loading the system settings
Note
Group Parameters Page