User Manual

PM5DV2/DSP5D Editor Owner’s Manual

G Channel number

This is the number of the FX RTN channel for this module. You can double-click this

number to open the Selected Channel window for this channel. If you hold down your

computer keyboard’s <Ctrl> key ( key) and double-click this, the Locked window

will open.

H MIX SEND

The send levels of the signals sent from the FX RTN channel to the VARI-type MIX

buses are shown as bar graphs (the L/R settings are linked). You can also adjust the send

levels by dragging a bar graph to left or right.

The bar graph display will change according to the send position (pre/post) and on/off

status of the signal sent from the FX RTN channel to the MIX buses (➥ p.9).

I PAN

Speciﬁes the panning of the signal sent from the FX RTN channel to the STEREO bus.

(You can set L and R separately.) This may be BALANCE depending on the PAN mode.

J SELECT

Selects the FX RTN channel for which you want to perform operations. (L and R can be

selected separately.) This is linked with the FX RTN channel strip [SEL] keys on the

PM5D panel.

K CH ON (Channel on) button

Switches the FX RTN channel on/off. This is linked with the FX RTN channel strip CH

[ON] keys on the PM5D panel.

L Channel name

This is a text box that displays the channel name. You can also edit the channel name in

this text box.

M Fader

Adjusts the input level of the FX RTN channel. This is linked with the faders of the FX

RTN channel strip on the PM5D panel.

The numbers and alphabetical letters at the right of the fader indicate the DCA group

and mute groups to which that channel belongs, and show the Recall Safe and Mute

Safe status of the channel (➥ p.10).

N CUE

This button cue-monitors the signal of the FX RTN channel. This is linked with the FX

RTN channel strip [CUE] keys on the PM5D panel. If SOLO is active, this will function

as SOLO.