English Deutsch Français Español Owner’s Manual Bedienungsanleitung Mode d’emploi Italiano Manual de instrucciones Manuale di istruzioni Nederlands Gebruikershandleiding EN DE FR ES IT NL ZH JA
Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
PRECAUTIONS English PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/Power cord Water warning • Only use the voltage specified as correct for the device.
Part Names and Functions English Part Names and Functions Front Panel 1 2 POWER Rear Panel 1 CASCADE IN OUT IN OUT IN TX RX TX RX POWER AC IN 3 4 1P:GND 4P:12V 5 A [POWER] Indicator This indicator lights up when power is supplied to the DCU5D. NOTE: This device does not have a power switch. B Mode switch Use this mode switch to update the firmware in the future. Do not press this switch if not necessary. C Ground screw To ensure safe operation, be sure to ground the DCU5D securely.
System Example English System Example Deutsch In this system a DCU5D unit is used to extend the distance between a PM5D unit and a DSP5D unit using an Ethernet CAT5 cable.
Appendix I/O Characteristics English Terminal Level Connector RS422 D-Sub Half Pitch Connector 68P(Female) 100Base-TX RJ-45*1 DC XLR-4-32 type*3 IN CASCADE OUT IN CASCADE OUT Deutsch EXT DC INPUT*2 *1. • Use a RJ-45 connector compliant with Neutrik EtherCon®. • Use a CAT5 STP (Shielded Twisted Pair) cable compliant with EtherSound.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A. Tel: 714-522-9011 ASIA POLAND Yamaha Music Central Europe GmbH Sp.z. o.o. Oddzial w Polsce ul.
