Owner's Manual

3-12
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
To install
1. Insert the projections on the front
of the seat into the holders, then
tighten the seat bolts.
2. Install the panels.
NOTE:
Make sure that the seat is securely
fitted.
1
EAU00261
Helmet holder
To open the helmet holder, insert the
key in the lock and turn it as shown.
To lock the helmet holder, turn the
key to its original position.
EW000030
w
Never ride with a helmet in the hel-
met holder. The helmet may hit
objects, causing loss of control
and possibly an accident.
1. Open
1
EAU01648
Seat
To remove
1. Remove panels D and E. (See
page 6-9 for panel removal and
installation procedures.)
2. Remove the seat bolts and lift
the seat upward.
1. Bolt (×2)
3MB-9-E7 12/27/00 2:52 PM Page 24