Owner's Manual

4-2
PRE-OPERATION CHECKS
1
2
3
4
5
6
7
8
9
ITEM CHECKS PAGE
Brake and shift pedal shafts
9 Check for smooth operation.
6-28
9 Lubricate if necessary.
Brake and clutch lever pivots
9 Check for smooth operation.
9 Lubricate if necessary.
Sidestand pivot
9 Check for smooth operation.
6-29
9 Lubricate if necessary.
Chassis fasteners
9 Make sure that all nuts, bolts and screws are properly tightened.
—
9 Tighten if necessary.
Fuel tank
9 Check fuel level.
3-6 ~ 3-8
9 Fill with fuel if necessary.
Lights, signals and
9 Check for proper operation. 6-33 ~ 6-35
switches
Battery
9 Check fluid level.
6-31 ~ 6-32
9 Fill with distilled water if necessary.
NOTE:
Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be accomplished in a
very short time; and the added safety it assures is more than worth the time involved.
w
If any item in the Pre-Operation Check is not working properly, have it inspected and repaired before operating
the motorcycle.
3MB-9-E7 12/27/00 2:52 PM Page 30