Service manual
CHAS
DISASSEMBLING THE FRONT BRAKE CALIPER
4-18
EAS00618
DISASSEMBLING THE FRONT BRAKE
CALIPER
NOTE:
Before disassembling the brake caliper, drain
the brake fluid from the entire brake system.
1. Remove:
• union bolt
• copper washers
• brake hose
NOTE:
Put the end of the brake hose into a container
and pump out the brake fluid carefully.
2. Remove:
• Retaining bolt (caliper body)
• Brake pads
• Pad springs
Refer to the “BRAKE PAD REPLACE-
MENT” section.
3. Remove:
• Caliper body
• Caliper bracket
4. Remove:
• Caliper piston
• Clip
• Dust seal
• Piston seal
2 1
2
1
2
1
2