Service manual

GEN
INFO
SPECIAL TOOLS
1-5
EAS00027
SPECIAL TOOLS
The following special tools are necessary for complete and accurate tune-up and assembly. Use
only the appropriate special tools as this will help prevent damage caused by the use of inappro-
priate tools or improvised techniques. Special tools, part numbers or both may differ depending on
the country.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No. Tool name / Usage Illustration
90890-01312 Fuel level gauge
This gauge is used to measure the fuel level in
the float chamber.
90890-03113 Engine tachometer
This tool is needed for detecting engine rpm.
90890-04086 Universal tool of subjection of the clutch
This tool is used to immobilize the clutch
during the assembly or disassembly of the
blockade nut of the clutch.
90890-01701 Sheave holder
This tool is used for holding the secondary
sheave.
90890-01362 Flywheel puller
For removing the flywheel.
90890-01304 Piston pin puller
This tool is used to remove the piston pin.
90890-01325 Radiator cap tester
90890-01352 Adaptor
These tools are used for checking the
cooling system.