Service manual

ENG
ENGINE REMOVAL
5-2
EXHAUST PIPE
1. Loosen:
• Bolts (Exhaust holder)
• Screw (muffler joint) 
2. Remove:
• A.I.S. hose 
• Bolts (Exhaust pipe) 
• Exhaust pipe
CARBURETOR
1. Remove:
• Fuel tank
• Carburetor
Refer to the “CARBURETOR REMOVAL”
section in chapter 6.
AUTOLUBE PUMP CABLE AND HOSE
1. Remove:
• Autolube pump cover 
2. Disconnect:
• hose 
(from autolube pump and hose guide)
• Gasket (autolube pump cover 
NOTE:
Plug the oil hose so that oil will not run out of
the oil tank.
3. Remove:
• Pump cable 
NOTE:
Turn the pump pulley clockwise by finger to
make the pump cable loose enough for its end
to be removed from the pulley.
1
1
2
1
1
2
1
3