Service manual
ENG
ENGINE DISASSEMBLY
5-15
3. Remove:
• Balancer weight
CRANKSHAFT
1. Remove:
• Crankshaft
NOTE:
• Remove the crankshaft with the Crankcase
Separating Tool
• Fully tighten the tool holding bolts, but
make sure the tool body is parallel with the
case. If necessary, one screw may be bac-
ked out slightly to level tool body.
POWER VALVE
NOTE:
With the engine mounted, the power valve can
be maintained by removing the following parts:
• Side covers
• Seat
• Radiator cover
• Cover (engine oil tank)
• Fuel tank
• Servomotor unit
Crankcase Separating Tool:
90890-01135
1
1
2