Service manual

ENG
ENGINE ASSEMBLY AND ADJUSTMENTS
5-42
MAGNETO ROTOR
1. Install:
• Stator 
2. Connect:
• Neutral switch lead 
3. Install:
• Woodruf key 
• Rotor 
• Plain washer 
• Nut (Rotor) 
NOTE:
• Clean the tapered portions of the cranks-
haft and rotor.
• When installing the rotor, make sure the
key is properly seated in the key way of
the crankshaft.
• Hold the rotor by the Rotor Holder to tigh-
ten the nut
Screw(Stator):
8 Nm (0.8 m•kg; 5.8 ft•lb)
Use Loctite®
Universal Rotor Holder:
90890-01235
Nut (Rotor):
80 Nm (8.0 m•kg; 58 ft•lb)
1
1
1
2
3
4