Service manual

ENG
ENGINE ASSEMBLY AND ADJUSTMENTS
5-55
8. Install:
• O-ring 
• Thermostatic valve 
• Gasket 
NOTE:
Apply the lithium soap base grease to the O-
ring
ss
WARNING
• Always use a new O-ring.
• Always use a new gasket.
9. Install:
• Cover (Thermostatic valve) 
10. Install:
• Spark plug 
• Thermo unit 
ss
WARNING
Handle the thermo unit with special care.
Never subject it too strong or allow it to be
dropped. In case of being hited, replace it.
Screw (Thermostatic Valve Cover):
8 Nm (0.8 m•kg, 5.8 ft•lb)
Spark plug:
20 Nm (2.0 m•kg, 14 ft•lb)
Thermo unit:
15 Nm (1.5 m•kg, 11 ft•lb)
1
3
2
1
2
1