Service manual

COOL
WATER PUMP
6-2
REMOVAL
NOTE:
It is necessay to disassemble the water pump
unless there is no abnormality such as exces-
sive change in coolant temperature and/or dis-
coloration of coolant or milky transmission oil.
1. Drain:
• Transmission oil
Refer to the “TRANSMISSION OIL REPLA-
CEMENT” section in chapter 3.
• Coolant
Refer to the “COOLANT REPLACEMENT”
section in chapter 3.
2.Disconnect:
• Outlet hose (Radiator) 
3.Remove:
• Screw (Water outlet pipe) 
4. Remove:
• Autolube pump cover
5. Disconnect:
• Oil delivery hose 
6. Remove:
• Gasket (Autolube pump cover) 
• Stopper clip (Pump cable)
• Clip (Pump cable outer)
• Autolube pump cable 
NOTE:
• Plug the oil hose so that oil will not run out
of the oil tank.
• Turn the pump pulley counterclockwise by
finger to make the pump calbe loose
enough for its end to be removed from the
pulley.
3
2
1
2
1