Service manual
ELEC
LIGHTING SYSTEM
8-17
EAS00781
TROUBLESHOOTING
Check:
1. Headlight bulb/”HI BEAM” indicator light
bulb
2. Headlight bulb socket/”HI BEAM”
3. “LIGHTS” (dimmer) switch
4. “Lights” switch
5. Lighting voltage
6. Lighting coil resistance
7. wiring connection
(of the entire lighting system)
NOTE:
• Before troubleshooting, remove the follo-
wing part(s):
1. Sidecovers (left and right)
2. Seat
3. Fuel tank
4. Headlight cover
5. Headlight unit
• Troubleshoot with the following special
tool(s).
Any of the following fail to light: head-
light, high beam indicator light, taillight,
auxiliary light or meter light.
1. Bulb
• Remove the bulb.
Refer to the “HEADLIGHT BULB REPLA-
CEMENT” section in the chapter 3.
• Connect the pocket tester (Ω 100) to the
bulbs terminals.
Positive tester probe
terminal
Negative tester probe
terminal
Positive tester probe
terminal
Negative tester probe
terminal
A. Headlight bulb
B. “HI BEAM” indicator light bulb
• Check the bulb for continuity.
• Is the bulb OK?
Pocket tester
90890-03112
Inductive Tachometer:
90890-03113
Replace the bulb.
YES
NO
A
B