Service manual

ELEC
LIGHTING SYSTEM
8-20
TROUBLESHOOTING
Check:
1. Meter light bulb
2. Meter light bulb socket
3. Wiring connection
(of the entire lighting system)
NOTE:
• Before troubleshooting, remove the follo-
wing part(s):
1. Sidecovers (left and right)
2. Seat
3. Fuel tank
4. Headlight cover
5. Headlight unit
• Troubleshoot with the following special
tool(s).
Meter light does not come on
1. Bulb
• Remove the bulb.
Refer to the “METER ASSEMBLY” section.
• Connect the pocket tester (Ω 1) to the
bulbs terminals.
Positive tester probe

terminal 
Negative tester probe

terminal 
• Check the bulb for continuity.
• Is the bulb OK?
Pocket tester
90890-03112
Inductive Tachometer:
90890-03113
Replace the bulb.
YES
NO