Service manual
ELEC
LIGHTING SYSTEM
8-21
2. Bulb socket
• Disconnect the bulb socket lead and cou-
pler from the wire harness.
• Install the bulb to the bulb socket.
• Connect the pocket tester (Ω 1) to the
bulbs socket lead end and coupler.
Positive tester probe
Blue lead
Negative tester probe
Black
Terminal
• Check the bulb socket for continuity.
• Is the bulb socket OK?
EAS00787
3. Wiring
• Check the entire lighting system’s wiring.
Refer to “CIRCUIT DIAGRAM”.
• Is the lighting system’s wiring properly con-
nected and without defects?
Replace the bulb
socket.
YES
NO
Properly connect or
repair the lighting
system’s wiring.
Check the condition
of each of the ligh-
ting system’s cir-
cuits.
Refer to “CHEC-
KING THE LIGH-
TING SYSTEM”.
YES
NO