Owner`s manual

3-4
NOTE:
When the key is turned to “ON”, the
speedometer displays “188 km/h” for
a few seconds, during which time the
electrical circuit is being checked.
2. Push the mode select button to
display a mode.
Mode “B”
To set the lower tripmeter to zero,
push the reset button for at least one
second.
To switch the tripmeter between for-
ward count and reverse count, push
the mode select button for one to
three seconds. A minus sign will
appear when in the reverse count
mode.
To set the reverse count distance:
1. Push the mode select button
until the digit for the hundreds
flashes.
2. Push the reset button to change
the hundreds.
3. Repeat this procedure to change
the tens and ones.
4. Push the mode select button
again to set the tripmeter.
–
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
1 2 3
4
5
6
1. Reset button “RESET”
2. Upper trip odometer
3. Lower trip odometer
4. Digital speedometer
5. Odometer/Clock “ODO/CLOCK”
6. Mode select button “SELECT”
Mode “A”
To set the upper tripmeter to zero,
push the reset button for at least one
second.
To display the clock or odometer
reading, push the mode select button
for one to three seconds.
To set the clock:
1. Push the mode select button
until the hour digits flash.
2. Push the reset button to change
the hour digits.
3. Push the mode select button,
and the minute digits will flash.
4. Push the reset button to change
the minute digits.
5. Push the mode select button
again to set the clock.
4TP-9-21 7/25/00 3:46 PM Page 22