Owner`s manual

3-14
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
NOTE:
Although the total number of clicks of
a damping force adjusting mecha-
nism may not exactly match the
above specifications due to small dif-
ferences in production, the actual
number of clicks always represents
the entire adjusting range. To obtain
a precise adjustment, it would be
advisable to check the number of
clicks of each damping force adjust-
ing mechanism and to modify the
specifications as necessary.
b
a
1
1. Adjusting knob
Compression damping force
To increase the compression damp-
ing force and thereby harden the
compression damping, turn the
adjusting knob in direction a. To
decrease the compression damping
force and thereby soften the com-
pression damping, turn the adjusting
knob in direction b.
b
a
1
1. Adjusting dial
Rebound damping force
To increase the rebound damping
force and thereby harden the
rebound damping, turn the adjusting
dial in direction a. To decrease the
rebound damping force and thereby
soften the rebound damping, turn the
adjusting dial in direction b.
Minimum (soft) 16 clicks in direction b*
Standard 9 clicks in direction b*
Maximum (hard) 1 click in direction b*
* With the adjusting dial fully turned in direction a
Minimum (soft) 5 clicks in direction a*
Standard 8 clicks in direction a*
Maximum (hard) 22 clicks in direction a*
* With the adjusting knob fully turned in direction b
4TP-9-21 7/25/00 3:46 PM Page 32