Owner`s manual

4-3
PRE-OPERATION CHECKS
1
2
3
4
5
6
7
8
9
NOTE:
Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be accomplished in a
very short time; and the added safety it assures is more than worth the time involved.
EWA00033
w
If any item in the Pre-operation check list is not working properly, have it inspected and repaired before operat-
ing the motorcycle.
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, sig-
nals and switches
• Check operation.
• Correct if necessary.
3-5, 6-34–6-38
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
3-16–3-17
ITEM CHECKS PAGE
4TP-9-21 7/25/00 3:46 PM Page 38