Owner`s manual

4. Place a container under the
engine and remove the coolant
drain bolt.
5. Disconnect the reservoir tank
hose on the reservoir tank side
and drain the coolant from the
reservoir tank.
6. After draining the coolant, thor-
oughly flush the cooling system
with clean tap water.
7. Replace the coolant drain bolt
washer if it is damaged and tight-
en the coolant drain bolt to the
specified torque.
6-12
EAU03101
Changing the coolant
1. Put the motorcycle on a level
place.
2. Remove cowling B and panel B.
(See pages 6-5 and 6-7 for cowl-
ing and panel removal and instal-
lation procedures.)
3. Remove the radiator cap stopper
bolt and the radiator cap.
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
5
6
7
8
9
1
2
1. Radiator cap stopper bolt
2. Radiator cap
1
1. Coolant drain bolt
2
3
1
1. Maximum level mark
2. Minimum level mark
3. Reservoir tank hose
Tightening torque:
Coolant drain bolt:
10 Nm (1.0 m0kg)
4TP-9-21 7/25/00 3:46 PM Page 54