User Manual

Setup Procedures
20
DTX900
2-4. Storing Drum Voices
Store your drum voice settings on the module as a User kit to ensure they are not lost.
1. Press the [DRUM KIT] button to access Drum Kit mode.
2. Press the [ENTER/STORE] button.
3. Turn the data dial to select the Drum Kit bank and Drum Kit number in which you wish to store your settings.
4. Press the [ENTER/STORE] button. You will be asked to confirm that you wish to proceed. Press the [DEC/NO] button to
cancel the process without storing any settings.
5. Press the [INC/YES] button to store your settings.
This completes the setup process.
You can now use your drum triggers to experience a whole new world of drumming.
Notice
Never attempt to turn off the drum trigger module while the message “Please keep power on” is shown. If this precaution is not
observed, user data may be lost or the internal system may be damaged, rendering your drum trigger module unable to startup nor-
mally when it is next turned on.
Destination Drum Kit bank for storing Destination Drum Kit number for storing