User Manual

96 Owner’s Manual
UTILITY Setting Area (UTIL)
From the Rename File page, you can rename files that have been
saved on a USB memory device.
1
Plug the USB memory device into the USB TO
DEVICE port on the side of the DTX-MULTI 12.
2
Navigate to the Rename File page (UTIL7-3) and
press the [ENTER] button to open the Type page
(UTIL7-3-1).
Use the Type parameter to indicate the type of file to be
renamed.
• All................All user data – i.e., all User kits, all User
waves, all User patterns, all User triggers, and
utility settings.
• AllKit...........All User-kit data
• AllWave.......All wave data
• AllPattern ....All User-pattern data
• AllTrigger....All User-trigger data
• Utility ..........Utility settings
3
Press the [ENTER] button to open the Rename From
page (UTIL7-3-2).
Select the file to be renamed using the [-/DEC] and [+/INC]
buttons.
Only those files matching your selection on the Type page
(UTIL7-3-1) will be presented for renaming.
4
Press the [ENTER] button to open the Rename To
page (UTIL7-3-3).
The [B]/[C] buttons can be used to move the flashing cur-
sor, and the [-/DEC] and [+/INC] buttons can be used to scroll
through the available characters. File names can be up to eight
characters long.
•Any space characters included in file names will be automatically
replaced with “_” (i.e., an underscore).
5
When you have set the new file name, press the
[ENTER] button.
You will be asked to confirm that the file is to be renamed.
6
Press the [ENTER] button to rename the file.
The following message will be displayed as the file is being
renamed.
When the renaming process has been completed, the message
“Completed.” will be displayed. Following this, the display
will return to the Rename File page (UTIL7-3).
UTIL7-3 Rename File page
Settings
All, AllKit, AllWave, AllPattern, AllTrigger, or
Utility
UTIL7-3≥≥≥<FILE>
≥≥Rename≥File
UTIL7-3-1≥<FILE>
Type=All
File type
UTIL7-3-2≥<From>
≥File=ALL_DATA
File name
• Do not unplug the USB memory device from the USB TO
DEVICE port or turn off either the memory device or the DTX-
MULTI 12 while data is being renamed. Failure to observe this
precaution can lead to the memory device or the DTX-MULTI 12
being permanently damaged.
UTIL7-3-3≥≥≥<To>
Name=[MYDATA]
NOTE
≥≥Rename≥File
≥Are≥you≥sure?
Executing...
CAUTION
UTIL7-3≥≥≥<FILE>
≥≥Rename≥File