User Manual

TRIGGER ReferenceKITMIDI VOICEUTILITY WAVEPATTERN
UTILITY Setting Area (UTIL)
Owner’s Manual 97
From the Delete File page, you can delete files that have been
saved on a USB memory device.
1
Plug the USB memory device containing the file(s)
you want to delete into the USB TO DEVICE port on
the side of the DTX-MULTI 12.
2
Navigate to the Delete File page (UTIL7-4) and press
the [ENTER] button.
The Type page (UTIL7-4-1) will open.
The Type parameter specifies the types of file to be deleted.
• All ...............All user data – i.e., all User kits, all waves, all
User patterns, all User triggers, and utility set-
tings.
• AllKit .......... All User-kit data
• AllWave.......All wave data
• AllPattern ....All User-pattern data
• AllTrigger....All User-trigger data
• Utility ..........Utility settings
3
Specify a file type using the Type parameter, and
press the [ENTER] button.
The File page (UTIL7-4-2) will open.
Select the file to be deleted using the [-/DEC] and [+/INC]
buttons. Only those files matching your selection on the Type
page (UTIL7-4-1) will be available for selection.
4
When you have selected the file to be deleted, press
the [ENTER] button.
You will be asked to confirm that the file is to be deleted.
5
To proceed, press the [ENTER] button.
The following message will be displayed as the data is being
deleted.
When the deletion process has been completed, the message
“Completed.” will be displayed. Following this, the display
will return to the Delete File page (UTIL7-4).
Certain types of USB memory device must be formatted before
they can be used with your DTX-MULTI 12. The correct way to
format such a device is as follows.
• In certain cases, USB memory devices formatted on a computer will
not be recognized by the DTX-MULTI 12. Be sure, therefore, to always
use this instrument to format memory devices that will be used with it.
1
Plug the USB memory device into the USB TO
DEVICE port on the side of the DTX-MULTI 12.
2
Navigate to the Format page (UTIL7-5) and press the
[ENTER] button.
You will be asked to confirm that the USB memory device is
to be formatted.
UTIL7-4 Delete File page
Settings
All, AllKit, AllWave, AllPattern, AllTrigger, or
Utility
UTIL7-4≥≥≥<FILE>
≥≥Delete≥File
UTIL7-4-1≥<FILE>
Type=All
File type
UTIL7-4-2≥<FILE>
≥File=ALL_DATA
File name
≥≥Delete≥File
≥Are≥you≥sure?
• Do not unplug the USB memory device from the USB TO
DEVICE port or turn off either the memory device or the DTX-
MULTI 12 while data is being deleted. Failure to observe this
precaution can lead to the memory device or the DTX-MULTI 12
being permanently damaged.
UTIL7-5 Format page
• All data on the USB memory device will be deleted during the
formatting process. Before formatting a memory device, there-
fore, ensure that any important data it contains is backed up.
Executing...
CAUTION
UTIL7-4≥≥≥<FILE>
≥≥Delete≥File
UTIL7-5≥≥≥<FILE>
≥≥≥≥≥Format
CAUTION
NOTE
≥≥≥≥Format
≥Are≥you≥sure?