User Manual

24
DTX-MULTI 12
Depending on the version of the firmware, you may need to update it. Before you connect the elec-
tronic percussion pad to your DT50S/DT50K triggers, be sure to check the version of your instru-
ment’s firmware.
1. While holding down the [SHIFT] button, turn on the instrument.
2. Confirm the version displayed on-screen.
If the version is 1.03 or earlier, search for “DTX-MULTI 12” on the web site below, and then follow the steps on the Firm-
ware Updater page to update the firmware.
Yamaha Downloads: http://download.yamaha.com
Confirm that the instrument has been updated to Version 1.10, and then proceed to the setup procedures on the following
page.
Checking the Firmware Version