User Manual
Table Of Contents
- Cover
- Contents
- Differences Between the DTX-PRO and the DTX-PROX
- Links from the Owner’s Manuals
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- PRO Series Modules Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- Practicing with the Training Feature
- Fader Select FX
- Fader Select CUSTM
- LIVE SET Mode
- Settings for live performances
- Connecting a Computer
- Troubleshooting
- Reference
MENU Button
50
DTX-PRO DTX-PROX Reference Manual
effect Controls the amount of Effect ([EFFECT] knob
value) according to how hard the pad is struck.
MinValue:
The minimum amount of Effect to be applied when
the pad is struck lightly
MaxValue:
The maximum amount of Effect to be applied
when the pad is struck strongly
CC01–CC95 Sends a Control Change message according to how
hard the pad is struck.
MinValue:
Minimum value when the pad is struck lightly
MaxValue:
Maximum value when the pad is struck strongly
MIDI Ch:
MIDI Channel
Xstick Adjust 1–127 Sets the strength for switching the cross sticking to or
from the open rim shots when hitting the rim of the
multi piezo pad connected to the [qSNARE] jack.
Increasing this value makes it easier to produce the
cross-stick sound when the pad is struck strongly.
Conversely, reducing this value makes it easier to
produce the open rim shot when the pad is struck
lightly.
Turn the cross stick setting off to always play the
open rim shot sound.
Note that this parameter is not effective when a sin-
gle-piezo pad is connected.
Snare Position off, on Switches the position sensor on the snare pad on or
off.
Turn the snare position on for creating tonal changes
according to the location within a zone that is struck.
To use this function, you will need to connect a pad
with a position sensor to the [qSNARE] jack.
You will also need to select an Inst or a voice that
supports position sensing.
For more information, refer to the Data List.
Ride Position off, on Switches the position sensor for the bow of the ride
cymbal on or off.
Turn the ride position on for creating tonal changes
based on location of the pad that is struck.
To use this function, you will need to connect a pad
with position sensing to the [iRIDE] jack.
You will also need to select an Inst or a voice that
supports position sensing.
For more information, refer to the Data List.
Screen Parameter Settings Description