User Manual
Table Of Contents
- Cover
- Contents
- Differences Between the DTX-PRO and the DTX-PROX
- Links from the Owner’s Manuals
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- PRO Series Modules Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- Practicing with the Training Feature
- Fader Select FX
- Fader Select CUSTM
- LIVE SET Mode
- Settings for live performances
- Connecting a Computer
- Troubleshooting
- Reference
MENU Button
56
DTX-PRO DTX-PROX Reference Manual
Parameters in this section are used for adjusting the tone of the entire kit.
Master EQ settings are applied to the entire kit (your performances and training songs) and HP Out/Output.
Master EQ settings are not applied to auxiliary input, recorder sounds, click sounds or output to Indiv Out on the DTX-PROX.
In specific terms, this five-band master EQ allows the signal level to be freely boosted or cut around a center frequency specified for each of
the bands. In addition, the “low” and “high” frequency bands can be set to either shelving or peaking type equalization.
With the DTX-PROX, you can quickly adjust the master EQ gain by setting the fader select to CUSTM and using the LED rotary faders.
MENU/Master EQ
Master EQ
Frequency
HighHighMidMidLowMidLow
Five EQ bands →
Q
Gain
MEQ Gain
MEQ Freq
MEQ Q
MEQ Shape