User Manual
Table Of Contents
- Cover
- Contents
- Differences Between the DTX-PRO and the DTX-PROX
- Links from the Owner’s Manuals
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- PRO Series Modules Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- Practicing with the Training Feature
- Fader Select FX
- Fader Select CUSTM
- LIVE SET Mode
- Settings for live performances
- Connecting a Computer
- Troubleshooting
- Reference
MENU Button
83
DTX-PRO DTX-PROX Reference Manual
(Name)
5. Set a new name for the file.
Press the “ ” button ([F2]) to move the cursor to the bottom of the screen.
Press the “Name” button ([F2]) to display the NAME screen.
6. Press the “RENAME” button ([F3]).
The Rename confirmation screen appears.
7. Press the “YES” button ([F1]) to change the name.
“Completed.” appears when the Rename process is complete, and the screen returns to step 2.
Entering the file name
1. Use the [–][+] controllers to select a character, and then use the “ ” and “ ” buttons ([F1] and [F3])
to move the cursor to the next character position. A file name of up to 16 characters can be assigned.
2. After entering all characters, press the “OK” button ([F2]).
NOTICE
Do not disconnect the USB flash drive from the [USB TO DEVICE] terminal or turn off the power to the PRO series modules while
the file is being renamed. Doing so may cause the PRO series modules to malfunction, or corrupt memory in the USB flash drive.