User Manual

35
DTX-PROX Owner’s Manual
Changing the Drum Set Sound (Building Your Own Drum Set)
Basic Guide
 Adjusting the Audio Balance
Use the mixer to adjust the overall volume balance of the pads.
1.
Set the fader select knob to “MIXER.”
The MIXER screen appears.
2.
Use the LED rotary faders to adjust the settings.
To adjust the volume of each pad, press the [MENU] button to change the Inst volume settings.
To adjust the volume of each section of the pad (Zone), press the [MENU] button to change the Voice volume settings.
For more information, refer to the Reference Manual (PDF).
3.
Press the button below “OK” (F3).
NOTE
• The mixer setting is retained after switching to another Kit.
• The mixer setting is not saved as a Kit setting.
Shown on the panel KICK SNARE TOM HI-HAT CRASH RIDE MISC
Pad Kick Snare Tom1
Tom 2
Tom 3
Hi-Hat Crash1
Crash2
Ride Others
Trigger input jack the
pad is connected to
!2KICK qSNARE wTOM1
rTOM2
yTOM3
!1HI-HAT oCRASH1
!0CRASH2
iRIDE e, t, u,
!3, !4