Owner`s manual
Assembly Guide
DTX400K/DTX430K/DTX450K Owner’s Manual
15
The details of are different for the DTX400K, DTX430K, and DTX450K.
Attaching the hi-hat
holder
1. Loosen the two key bolts on the joint on the snare-
pad part, which was attached in .
2. Take the hi-hat holder (!1) from the package and slide it
into the joint from the front as shown in the figure. Then
adjust the angle of the hi-hat holder.
• When correctly inserted, the tip of the hi-hat holder
(!1) will protrude slightly from the rear of the joint.
• When correctly oriented, the metal rod section at the
top of the hi-hat holder (!1) will be vertical.
3. Tighten the two key bolts to secure the hi-hat holder
(!1) in place.
Attaching the hi-hat
holder
1. Loosen the two key bolts on the joint on the left arm,
which was attached in .
2. Take the hi-hat holder (!1) from the package and slide it
into the joint from the rear as shown in the figure. Then
adjust the angle of the hi-hat holder.
• When correctly inserted, the tip of the hi-hat holder
(!1) will protrude slightly from the front of the joint.
• When correctly oriented, the metal rod section at the
top of the hi-hat holder (!1) will be vertical.
3. Tighten the two key bolts to secure the hi-hat holder
(!1) in place.
Attaching the cymbal holders
1. Loosen the four key bolts at the ends of the first/sec-
ond tom part, which was attached in .
2. Take the cymbal holders (!0) from the package and
insert them into the ends of the first/second tom part.
Then adjust the angles of the cymbal holders until they
are oriented as shown in the figure.
• When correctly inserted, the tips of the cymbal hold-
ers (!0) will protrude slightly from the bottom of the
tom part.
• When correctly oriented, the cymbal holders (!0) will
be as shown in the figure.
3. Tighten the four key bolts to secure the cymbal hold-
ers (!0) in place.
Step 8
For DTX400K and DTX430K Owners For DTX450K Owners
Step 8
!1
Snare pad
Joint
Step 7
Step 8
!1
Left arm
Joint
Step 4
Step 9
!0!0
The two cymbal holders are identical.
Step 6
NOTE