Owner`s manual

Setting Parameters using Menu Mode

DTX400K/DTX430K/DTX450K Owner’s Manual

5-2. Crosstalk

The term “crosstalk” refers to the output of spurious trigger

signals from a pad other than the one that was stuck as a

result of vibration or interference between pads. Using the

following procedure, you can adjust the Crosstalk parameter

for individual pads to prevent this phenomenon from occur-

ring.

1. While holding the [KIT] button, press the [SONG] but-

ton to activate Menu Mode.

2. Press number button [5] to select the Trigger Settings

parameter group.

3. Press number button [2] to select the Crosstalk parame-

ter.

4. Strike a pad to select it.

5. Enter a new setting (%) using number buttons [1] to

[10/0]. Larger values are more effective in preventing

crosstalk; however, they can also make it difficult to

play pads simultaneously during light drumming.

Velocity

Trigger input level

Velocit y

Trigger input level

Velocity

Trigger input level

Steps:

MENU ([KIT] + [SONG])  [5]  [2]  Setting

Setting

0 to 99

Setting