User Manual
Table Of Contents
- Owner’s Manual
- About the Manuals
- Included Accessories
- Introduction
- Getting Started
- Connecting the AC Power Cable
- Connect powered speakers (Sold separately for Upright piano)
- Turning the Power On/Off
- How to use the Silent Piano™ Function (For Pianos Equipped with the Silent Piano™ Function)
- Connecting the Product and Smart Device to a Network
- Choosing the Network Connection Method
- Wireless Network Connection by WPS
- Wired Network Connection
- Direct Wireless Connection
- Using the ENSPIRE Controller App
- IDC Registration
- Other Settings
- Troubleshooting
- Glossary
- Specifications
- Appendix
Introduction
English
1
Chapter
11
1 [USB] (To DEVICE) terminal
Used to connect the USB flash drive.
Note:
This product cannot detect the USB flash drive if two or more
memory devices are connected at the same time.
2 [LAN] port
Used to connect the router or hub using an Ethernet
cable.
3 [USB] (To HOST) terminal
Used to connect the computer using a USB cable.
4 [MIDI IN]/[MIDI OUT] jacks
Used to connect to the MIDI input or output jacks of
external MIDI devices using MIDI cables.
5 [DIGITAL OUT] jack
Used to connect to the digital input jack of an
external audio device using a digital coaxial cable.
6 [OMNI] (SYNC) [IN]/[OUT] jacks
Used to connect to the input or output jacks of
external audio devices using RCA cables.
7 [OUTPUT] jacks
Used to connect the monitor speakers.
Control Center Unit
Rear panel
123 4 5
6
7
Side panel