User Manual

9
RS6 Owner’s Manual
2. Attach a cymbal holder to each of the three cymbal clamps.
2-1. Loosen the bolt on the cymbal clamp.
2-2. Insert the cymbal holder.
2-3. Securely tighten the bolt on the cymbal clamp.
3. Attach the snare holder to the snare clamp.
3-1. Loosen the bolt on the snare clamp.
3-2. Insert the snare holder.
3-3. Securely tighten the bolt on the snare clamp.
CAUTION
Take special care with the snare holder as the rod has a sharp tip that could cause injury.
Your electronic drum rack is now ready. For instructions on assembling the pads and the drum trig-
ger module, please refer to the Assembly Manual that came with the pad set package.
Cymbal holder
Bolt
Cymbal clamp
Sleeve (black)
Bolt
Snare clamp
Snare holder