User Manual
Table Of Contents
- Cover
- Contents
- Differences Between the DTX-PRO and the DTX-PROX
- Links from the Owner’s Manuals
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- PRO Series Modules Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- Practicing with the Training Feature
- Fader Select FX
- Fader Select CUSTM
- LIVE SET Mode
- Settings for live performances
- Connecting a Computer
- Troubleshooting
- Reference
MENU Button
37
DTX-PRO DTX-PROX Reference Manual
Volume
Other
MENU/Kit Edit/Volume
Screen Parameter Settings Description
Kit Volume 0–127 Sets the overall volume for the kit. Adjust the
balance between kits.
Inst Volume 0–127 Sets the volume of the Inst. Adjust the balance
between Inst sounds within the same kit.
Voice Volume 0–127 Sets the volume of the voice assigned to a
layer.
Use this parameter to adjust the balance
between zones in the same Inst, and the bal-
ance between layers.
MENU/Kit Edit/Other
Screen Parameter Settings Description
Temp o off, 30–300 Sets the metronome tempo for the selected kit.
When set to “off,” the tempo stays the same
when the kit has been changed.
For using the metronome to check the tempo
during live performance or for using tempo
sync effects, use the tempo set to the kit.
Note that this parameter is not applied to Live
Sets on the DTX-PROX. If you wish to change
the kit tempo by switching to the next step, use
the tempo parameter.
TrgSetupLink
off, U01–U10 Use the [–][+] controllers to select a trigger
setup for the selected kit.
When set to “off,” the trigger setup stays the
same when the kit has been changed.
PROX