User Manual

Setup Procedures
27
DTX-MULTI 12
2-4. Storing Voices
Store your voice settings on the instrument as a User kit to ensure they are not lost.
1. Press the [VOICE] button to access the Voice setting area.
2. Press the [STORE] button.
The following will be displayed on-screen. Use the [–/DEC] and [+/INC] buttons to indicate where you wish to store your
settings.
3. Press the [ENTER] button. You will be asked to confirm that you wish to proceed. Press the [EXIT] button to cancel the pro-
cess without storing any settings.
4. To proceed, press the [ENTER] button.
This completes the setup process.
You can now use your drum triggers to experience a whole new world of drumming.
NOTE
Voice data is stored as part of kit data. For details, refer to “Internal Design—Makeup of Internal Memory” in the DTX-MULTI 12 Owner’s Manual.
Notice
Never attempt to turn off the instrument while the message “Please keep power on” is shown. If this precaution is not observed, user
data may be lost or the internal system may be damaged, rendering your instrument unable to startup normally when it is next
turned on.
Destination for storing