User Manual

Advanced Setup
7
DTX502
2-4. Saving Voices
Save your voice settings on the drum trigger module as a User kit to ensure they are not lost.
1. Press the [SAVE/ENTER] button.
2. Turn the Data Dial to select the User kit number (51 to 100) in which you wish to save your settings.
3. If necessary, name your new drum kit. Press the [<]/[>] buttons to move the cursor to the character you wish to change, and
then turn the Data Dial to change it.
4. Press the [SAVE/ENTER] button. To cancel the process without saving any settings, press the [ ] button.
5. To proceed, press the [SAVE/ENTER] button once again.
2-5. Setting other Trigger Parameters
Based on the recommended settings below, adjust the parameters in accordance with your drum setup. Refer to “Menu
Mode—Trigger-related settings” in the DTX502 Owner’s Manual for details on other trigger input parameters such as Gain and
Minimum Level.
Recommended Settings (regular drums)
Recommended Settings (Mesh Pads)
This completes the advanced setup process.
You can now use your drum triggers to experience a whole new world of drumming.
Click here for hints on how to make your triggers easier to use. TIPS!
Velocity
Curve
Gain
Minimum
Level (%)
Minimum
Velocity
Reject
Time (ms)
Wait Time
(ms)
Noise
Filter
DT50S
Snare
(Head) norm 65 30 1 20 3 6
(Rim) norm 85 25 1 20 3 6
To m
(Head) norm 40 35 1 51 3 7
(Rim) norm 85 25 1 26 3 7
Floor tom
(Head) norm 20 35 1 51 3 8
(Rim) norm 85 25 1 26 3 7
DT50K Bass drum — norm 27 35 1 20 5 8
Velocity
Curve
Gain
Minimum
Level (%)
Minimum
Velocity
Reject
Time (ms)
Wait Time
(ms)
Noise
Filter
DT50S
Snare norm 85 0 1 26 3 6
Tom norm 75 0 1 26 3 6
Floor tom norm 85 0 1 26 3 6
DT50K Bass drum norm 85 0 1 20 5 7
Destination for saving