User Manual

DTX700 Extension Installation Guide 3

DTX700 Extension is software which lets you operate the Cubase functions from the DTX700 as a remote controller.

For example, you can operate the Cubase transport, turn its metronome on or off, and control various other

functions from the instrument's front panel.

Windows/Mac

The system requirements of DTX700 Extension are the same as Cubase series version 5.1.1 or later.

To use the DTX700 Extension, you will need to install additional applications, as described below.

Install one of the Cubase series software.

2 Install an appropriate USB-MIDI Driver.

Download the latest driver from our website:

http://www.global.yamaha.com/download/usb_midi/

3 Install the DTX700 Extension.

Refer to “Installing the DTX700 Extension.”

Follow the instructions below to install the DTX700 Extension programs.

Windows

1 Double-click the installer (Install DTX700 Extension 32bit.exe or Install DTX700 Extension64bit.exe),

which can be found in the folder created when the downloaded file was expanded.

The DTX700 Extension setup dialog appears.

2 Follow the on-screen instructions to install the software.

Mac

1 After the downloaded compressed file is properly extracted, double-click the “Install DTX700

Extension.pkg” file.

The DTX700 Extension setup dialog appears.

2 Follow the on-screen instructions to install the software.

About DTX700 Extension

Minimum System Requirements

NOTE

Keep in mind that the software is often updated and the system requirements are subject to change. You can check the

latest version information of each program and its system requirements at the following website:

http://dtxdrums.yamaha.com/

You can check the latest version information of Cubase series and their system requirements at the following website.

http://www.steinberg.net/

The system requirements may differ slightly depending on the particular computer.

NOTE

DTX700 Extension is not compatible with versions of Cubase earlier than 4.x.

NOTE

DTX Extension does not support PowerPC architectures.

Software Installation

Installing the DTX700 Extension

NOTE

When using Windows Vista / Windows 7, if the “User Account Control” window appears, click [Continue] / [Yes].