User Manual

DTX700 Owner’s Manual

Basic Operation

Performing on Many Different Kits

5 Press the [STORE] button.

If you do not wish to store your settings, press the [EXIT]

button to return to the previous page.

6 Press the dial to store your new settings.

Normally, your DTX700’s display shows the name of the kit

and an artist’s impression of what it might look like. As

described below, however, you can change the display mode to

show just the kit name.

1 Press the [KIT] button.

2 Hold down the [SHIFT] button and press the

[F3] button (Display).

The display mode will now change to show just the kit

name.

NOTE

• If you wish to return to the original display mode, hold

down the [SHIFT] button and press the [F3] button (Dis-

play) once again.

Switching the Display Mode