User Manual

KIT
DTX700 Reference Manual
20
Alternate Group (AltGroup)
Use this parameter to assign voices to alternate groups (i.e.,
monophonic sets of pads, only one of which can be producing a
sound at any time). If you do not want various individual voices
to be played together, they should be assigned to the same alter-
nate group. Whenever voices from the same alternate group are
triggered by playing the pads, the latter voice is given priority and
the earlier one is silenced. Set this parameter to “off” if you do
not want to assign to an alternate group.
Settings: off, hhOpen, hhClose, 1 to 124
NOTE
• The “hhOpen” and “hhClose” alternate groups operate in a
special way: If a voice from the “hhClose” group is triggered
after a voice from the “hhOpen” group, the hhOpen voice is
silenced and only the hhClose voice is played. No silencing of
the earlier sound is performed for any other triggering
sequence (for example, hhOpen followed by hhOpen; hhClose
followed by hhOpen; or hhClose followed by hhClose).
SliderSelect
Use this parameter to select the slider for controlling the volume
of the current pad’s voices.
Settings: kick, snare, tom, cymbal, hihat, no asg (selected when
no assignment is required)
KIT/MIDI
 List of Functions
MessageType
Use this parameter to set the type of MIDI message that will be
sent whenever the current pad is struck.
For MIDI-related settings
KIT/MIDI/ASSIGN 1/5
note
A MIDI note will be sent. Use this setting if you wish
to produce a sound by striking the pad.
CC A Control Change message will be sent.
PC A Program Change message will be sent.
start
A sysex Start command (hexadecimal FA) will be
sent.
continue
A sysex Continue command (hexadecimal FB) will
be sent.
stop
A sysex Stop command (hexadecimal FC) will be
sent.
MIDI
Assign
MessageType
Mode
Note
MIDI Ch
GateTime
RcvKeyOff
TrgLink
MaskTime
VelLimitLo
VelLimitHi
VelCrossFade
TrgVel
TrgMonoPoly
Trg Al t G rp
TG MIDI Sw
TG Switch
MIDI Switch
Other
Transmit
Volume
Pan
MSB
LSB
PC
VarSend(Dry)
ChoSend
RevSend
CC No
CC Val