User Manual

KIT
DTX700 Reference Manual
28
KIT/EQ
 List of Functions
 Setting the Kit Equalizer
The parameters from the Menu area’s Kit/EQ page
can be used to adjust the kit equalizer that shapes
the tone of voices, songs, and other audio output. In
specific terms, this four-band equalizer allows the
signal level to be freely boosted or cut around a cen-
ter frequency specified for each of the bands. In
addition, the “low” and “high” frequency bands can
be set to either shelving or peaking type equaliza-
tion.
NOTE
• Kit equalization affects both drum and melody sounds.
LowGain, LowMidGain, HighMidGain, and HighGain
Use these parameters to boost or cut the center-frequency levels
of the low, low-mid, high-mid, and high frequency bands, respec-
tively.
Settings: -12 to +0 to +12
LowFreq, LowMidFreq, HighMidFreq, and HighFreq
Use these parameters to set the center frequencies of the low, low-
mid, high-mid, and high frequency bands, respectively.
Settings: LowFreq: 32Hz to 2.0kHz when LowShape is set to
“shelving”
63Hz to 2.0kHz when LowShape is set to
“peaking”
LowMidFreq, HighMidFreq: 100Hz to 10kHz
HighFreq: 500Hz to 16kHz
For setting kit equalization
KIT/EQ 1/4 to 4/4
EQ
LowGain
LowFreq
LowQ
LowShape
LowMidGain
LowMidFreq
LowMidQ
HighMidGain
HighMidFreq
HighMidQ
HighGain
HighFreq
HighQ
HighShape
Gain
Low HighMid
LowMid High
Frequency (Hz)
Q
Four EQ bands