User Manual
UTILITY
DTX700 Reference Manual
43
Device Number (DeviceNo.)
Use this parameter to set a MIDI device number for the DTX700.
In order to successfully exchange bulk data, parameter changes,
and other system exclusive MIDI messages, this setting must
match the Device Number of the external MIDI device.
Settings: 1 to 16, all, off
UTILITY/FACTORY SET
From the Factory Set page, you can restore all of the
DTX700’s user data (i.e., all User kits, User trigger
setups, User songs, waves, and utility settings) to
their default conditions.
PowerOn Auto
If you select the “PowerOn Auto” checkbox, the Factory Set (i.e.,
default settings) will be restored each time you turn on your
DTX700.
Restoring Defaults
1. Press the [F3] button (EXECUTE).
You will be asked to confirm that you wish to restore the
Factory Set.
2. To proceed, press the dial.
Alternatively, you can press the [EXIT] button to cancel
the process.
The following message is displayed during the restoration
process.
CAUTION
• Whenever the instrument is reset in this way, any settings
you have made will be overwritten with the corresponding
defaults. All important user-defined data should, there-
fore, be saved on a USB memory device (see page57) in
advance.
all
System exclusive messages for all MIDI device
numbers will be received. In addition, the DTX700
will transmit messages using Device Number 1.
off
System exclusive messages such as bulk dump
and parameter changes will be neither transmitted
nor received. An error message will be displayed
if an attempt is made to perform such an opera-
tion.
For restoring default settings
UTILITY/FACTORY SET