User Manual

Internal Design of the DTX700
DTX700 Reference Manual
7
 Effect Signal Flow
*1: Click-track voices cannot be sent to effects.
*2: Using the VarSend(Dry) (Variation Send Level) parameter, you can set the required balance between the amount of the
signal that will bypass the effect (i.e., the dry level) and the amount that will be sent to the effect (i.e., the wet level).
*3: Effects cannot be applied to external audio input via the [AUX IN] port.
 Effects & Effect Categories
The various individual effects provided by this instrument’s
effect units are sorted into a number of different categories.
What follows is a description of each category and the effects it
contains. We recommend that you refer to these descriptions
whenever setting effects. Each category’s effect table indicates
which of the effect units – i.e., Reverb (Rev), Chorus (Cho), or
Variation (Var) – can be used to apply the effect in question.
Any effect marked using a  symbol can be selected and modi-
fied on the corresponding effect unit’s parameter setting pages.
 Compressor & EQ
The compressor is an effect commonly used to limit and
compress the dynamics (i.e., softness or loudness) of an
audio signal. In the case of vocals, guitar parts, and other
signals that have widely varying dynamics, this effect essen-
tially squeezes the dynamic range, making soft sounds
louder and loud sounds softer. Furthermore, a compressor’s
attack and decay characteristics can be adjusted to modify
how punchy or sustained an audio signal sounds. Multi-band
compression, meanwhile, splits the input into three different
frequency bands for processing independent of each other;
accordingly, this type of effect can be thought of as combin-
ing compression with equalization.
AUX IN
Variation
Chorus
Reverb
Dry signal
Kit EQ Master EQ
RevReturn
ChoReturn
VarReturn
VarPan
ChoPan
RevPan
VarToRev
ChoToRev
VarToCho
RevSend
ChoSend
VarSend
VarSend(Wet)
VarSend(Dry)
*
1
*
3
*
2
Effect Type Var Description
Compressor 
Relatively fast-acting compressor well
suited to solo performances.
MltBndComp  Three-band compressor.
3 Band EQ 
Three-band compressor also featuring
equalization.
Vintage EQ  Vintage five-band parametric equalizer.
Enhancer 
Adds higher-order harmonics to enhance a
sound’s presence.