User Manual
Table Of Contents
- Cover
- Contents
- Differences Between the DTX-PRO and the DTX-PROX
- Links from the Owner’s Manuals
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- PRO Series Modules Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- Practicing with the Training Feature
- Fader Select FX
- Fader Select CUSTM
- LIVE SET Mode
- Settings for live performances
- Connecting a Computer
- Troubleshooting
- Reference
Settings for live performances
134
DTX-PRO DTX-PROX Reference Manual
Functions
Pad Function
During a live performance, you can strike a pad to switch to another kit or to start or stop the click sound.
During the live performance, you can strike a pad to proceed to the next step in a Live Set, or to start or stop the audio playback
or click sound.
MENU/Utility/Pad/Pad Function
Live Set (audio songs, click settings, etc.)
You can use the internal click to add pre-counts, or play click sounds (at a fixed tempo) for playing back audio files.
LIVE SET/SETTING/EDIT/Offset Time, PreCount, CountOff, Wav&Click Sync
LED Rotary Faders (FX, MIDI CC, etc.)
You can set an Insertion Effect type for each pad and control the amount of effect in real-time.
Fader select FX/InsType, FX/InsDepth
You can control external devices and DAW software in live performance situations by sending MIDI Control Change messages.
Fader select CUSTM/MIDI CC
Triggers (multiple trigger setup)
The conditions for the crosstalk occurring may vary depending on the venue. You can quickly change the crosstalk settings right at the
venue, and store the settings as a user trigger, while keeping the original set of trigger settings unchanged.
Change settings in TRIGGER/SETTING → Store → Switch trigger settings on the top screen for the TRIGGER mode
You can change the trigger setup for each kit.
MENU/Kit Edit/Other/TrgSetupLink
Click (Count Off and Click Out)
For checking the tempo of the song before the performance, you can set the click to be automatically turned off after playing one or two
measures.
CLICK/SETTING/ClickCountOff
The same setting is available for steps in Live Sets.
The click sounds can also be output to Indiv Out.
Fourth page on MENU/Utility/Indiv Out
Importing sampled sounds
You can assign up to 10 sampled audio files to a user voice and set each of them to be played at different velocities.
MENU/Job/User Voice
By using four layers, you can use up to 40 sampled audio files and set each of them to be played at different velocities.
MENU/Kit Edit/Voice
PRO
PROX
Setting
PROX
Setting
PROX
Setting
Setting
PROX
Setting
Setting
Setting
PROX
PROX
Setting
Setting
Setting