User Manual
Table Of Contents
- Cover
- Contents
- Differences Between the DTX-PRO and the DTX-PROX
- Links from the Owner’s Manuals
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- PRO Series Modules Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- Practicing with the Training Feature
- Fader Select FX
- Fader Select CUSTM
- LIVE SET Mode
- Settings for live performances
- Connecting a Computer
- Troubleshooting
- Reference
LIVE SET Mode
127
DTX-PRO DTX-PROX Reference Manual
(Kit) off, kit number Register the kit for the step. The kit does not
change when this setting is off.
(Tempo)tempo off, 30.0–300.0 Register the tempo for the step. When “off,”
the click sound will not play even when you
press the “PLAY” button. If the audio file is also
“off,” the “PLAY” button will not be shown.
(Click)
PreCount
off, 1, 2 (number
of measures)
Sets the number of PreCount measures.
When the audio file and the click sound are set
to be played simultaneously, PreCount is
added before the song starts.
CountOff off, 1, 2, stop Sets the click sound to be played for one mea-
sure or for two measures. When set to “off”,
the click sound continues to play.
When set to “stop”, the click will stop when the
PreCount ends.
(Audio file) off, 001–1000 Prepare an audio file and save to a USB flash
drive as described in “Preparing an Accompa-
niment Song (Audio File)” under “Overdub
Recording Your Performance onto an Accom-
paniment Song” in the DTX-PROX Owner’s
Manual.
Wav&Click
Sync
off, on When on, pressing the “PLAY” button starts
the audio file and click sound in sync.
Set Tem po to a value that matches the tempo
of the audio file, set Offset Time to adjust the
timing for starting the playback, and set Pre-
Count.
Offset Time 0 ms–
99sec999ms
(1 ms increments)
Use this parameter to set the offset time.
Adjust this setting when the audio file playback
and the click sound are out of sync.
To fix this problem, first find the time length
from the beginning of the audio file to the first
beat of the song, and then set the time length
value to this parameter.
The offset timing determines the timing of the
first beat of the click, as well as the timing for
the PreCount.
Screen Parameter Settings Description