User Manual
Table Of Contents
- Cover
- Contents
- Differences Between the DTX-PRO and the DTX-PROX
- Links from the Owner’s Manuals
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- PRO Series Modules Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- Practicing with the Training Feature
- Fader Select FX
- Fader Select CUSTM
- LIVE SET Mode
- Settings for live performances
- Connecting a Computer
- Troubleshooting
- Reference
MENU Button
43
DTX-PRO DTX-PROX Reference Manual
WaitTime 1–64 (msec) Sets the time until the target pad detects a trig-
ger signal. Adjust the setting so that the trigger
signal is detected at its peak and that the
strength for striking the pad corresponds to the
volume of the sound produced.
RimGain 1–127 Sets the rim gain level of a multi-piezo pad con-
nected to a multi-piezo supported jack.
When using a mono × 2 input jack, this parame-
ter is effective only in the paired input mode.
H/R Balance H49–H1, 0, R1–R49 Sets the balance between the head and rim of a
multi piezo pad. If the head sound is produced
when the rim is struck, increase the R value to
make the rim sound louder.
If the rim sound is produced when the head is
struck, press the [–] button to increase the H
value to make the head sound louder. When
using a mono × 2 input jack, this parameter is
effective only when the input mode is set to
“paired.”
Screen Parameter Settings Description