User Manual

DTX900 Data List
15
Effect Parameter List
Reverb Block
[0] No Effect
When this type is selected, no parameters are available.
[1] REV-X HALL
[4] REV-X ROOM
No. Parameter Range
1 Reverb Time 0.3s – 18.0s (REV-X HALL)
0.3s – 10.0s(REV-X ROOM)
2 Diffusion 0 – 10
3 Initial Delay 0.1ms – 200.0ms
4 HPF Cutoff Frequency 20Hz – 8.0kHz
5 LPF Cutoff Frequency 1.0kHz – 20.0kHz
6 Room Size 0 – 31
7 High Ratio 0.1 – 1.0
8 Low Ratio 0.1 – 1.4
9 Decay 0 – 63
10 —
11 —
12 —
13 —
14 —
15 —
16 —
[2] R3 HALL
[3] SPX HALL
[5] R3 ROOM
[6] SPX ROOM
[7] R3 PLATE
[8] SPX STAGE
No. Parameter Range
1 Reverb Time 0.3s – 30.0s
2 Diffusion 0 – 10
3 Initial Delay 0.1ms – 200.0ms
4 HPF Cutoff Frequency 20Hz – 8.0kHz
5 LPF Cutoff Frequency 1.0kHz – 20.0kHz
6 —
7 —
8 —
9 —
10 —
11 Reverb Delay 0.1ms – 200.0ms
12 Density 0 – 4
13 ER/Rev Balance E63>R – E=R – E<R63
14 Feedback High Damp 0.1 – 1.0
15 Feedback Level -63 – +63
16 —
[9] SPACE SIMULATOR
No. Parameter Range
1 Reverb Time 0.3s – 30.0s
2 Diffusion 0 – 10
3 Initial Delay 0.1ms – 200.0ms
4 HPF Cutoff Frequency 20Hz – 8.0kHz
5 LPF Cutoff Frequency 1.0kHz – 20.0kHz
6 Width 0.5m – 30.2m
7 Height 0.5m – 30.2m
8 Depth 0.5m – 30.2m
9 Wall Vary 0 – 30
10 ---
11 Reverb Delay 0.1ms – 200.0ms
12 Density 0 – 4
13 ER/Rev Balance E63>R – E=R – E<R63
14 Feedback High Damp 0.1 – 1.0
15 Feedback Level -63 – +63
16 Space Type 0 – 1
Chorus,Variation,Insertion Block
The Dry/Wet (Mix) parameter is available only for the Insertion Block.
[0] THRU/No Effect
When this type is selected, no parameters are available.
Category - REVERB
[1] SPX HALL
[2] SPX ROOM
[3] SPX STAGE
No. Parameter Range
1 Reverb Time 0.3s – 30.0s
2 Diffusion 0 – 10
3 Initial Delay 0.1ms – 99.3ms
4 HPF Cutoff Frequency 20Hz – 8.0kHz
5 LPF Cutoff Frequency 1.0kHz – 20.0kHz
6 —
7 —
8 —
9 —
10 Dry/Wet Balance D63>W – D=W – D<W63
11 Reverb Delay 0.1ms – 99.3ms
12 Density 0 – 4
13 ER/Rev Balance E63>R – E=R – E<R63
14 Feedback High Damp 0.1 – 1.0
15 Feedback Level -63 – +63
16 —
[4] EARLY REFLECTION
No. Parameter Range
1 Type S-hall, L-hall, random, reverse, plate, spring
2 Room Size 0.1 – 20.0
3 Diffusion 0 – 10
4 Initial Delay 0.1ms – 200.0ms
5 Feedback Level -63 – +63
6 HPF Cutoff Frequency 20Hz – 8.0kHz
7 LPF Cutoff Frequency 1.0kHz – 20.0kHz
8 —
9 —
10 Dry/Wet Balance D63>W – D=W – D<W63
11 Liveness 0 – 10
12 Density 0 – 3
13 Feedback High Damp 0.1 – 1.0
14 —
15 —
16 —
Category - DELAY
[1] CROSS DELAY
No. Parameter Range
1 Delay Time L>R 0.1ms – 1638.3ms
2 Delay Time R>L 0.1ms – 1638.3ms
3 Feedback Level -63 – +63
4 Input Select L, R, L&R
5 Feedback High Damp 0.1 – 1.0
6 —
7 —
8 —
9 —
10 Dry/Wet Balance D63>W – D=W – D<W63
11 —
12 —
13 EQ Low Frequency 32Hz – 2.0kHz
14 EQ Low Gain -12dB – +12dB
15 EQ High Frequency 500Hz – 16.0kHz
16 EQ High Gain -12dB – +12dB