User Manual

TRIGGER ReferenceKITMIDI VOICEUTILITY WAVEPATTERN
KIT Setting Area (KIT)
Owner’s Manual 49
1 Variation return (VarReturn)
Use this parameter to set the level of the return signal from the
variation effect.
1 Variation pan (VarPan)
Use this parameter to set the stereo panning of the variation
effect’s return signal.
1 Variation to reverb (VarToRev)
Use this parameter to set the degree to which the output from
the variation effect is sent to the reverb effect.
1 Variation to chorus (VarToCho)
Use this parameter to set the degree to which the output from
the variation effect is sent to the chorus effect.
Chorus Effect Setup
In the CHORUS section, you can select a chorus effect and con-
figure it in a range of different ways. Chorus effects are applied to
all voices (on all MIDI channels). With the CHORUS page
(KIT5) displayed, press the [ENTER] button to access its four
parameter-setting pages (KIT5-1 to KIT5-4). You can use the
[B]/[C] buttons to navigate between these pages.
1 Chorus type
Use this parameter to select a chorus-effect type.
With a chorus type selected, you can press the [ENTER] button
on the Chorus Type page (KIT5-1) to access a range of setting
pages allowing each of its parameters to be set. (The number of
parameter-setting pages depends on the type selected.) Use the
[B]/[C] buttons to navigate between these pages.
KIT5-1-1 Parameter setting page (example)
1 Effect parameter
Each parameter setting page contains a different parameter for
the selected chorus type.
1 Chorus return (ChoReturn)
Use this parameter to set the level of the return signal from the
chorus effect.
KIT4-2 Variation Return page
Settings 0 to 127
KIT4-3 Variation Pan page
Settings L63 to C to R63
KIT4-4 Variation to Reverb page
Settings 0 to 127
KIT4-5 Variation to Chorus page
Settings 0 to 127
KIT4-2≥≥≥≥≥<VAR>
≥VarReturn=≥64
1
KIT4-3≥≥≥≥≥<VAR>
≥≥≥VarPan=≥C
1
KIT4-4≥≥≥≥≥<VAR>
≥≥VarToRev=≥≥0
1
KIT4-5≥≥≥≥≥<VAR>
≥≥VarToCho=≥≥0
1
KIT5 CHORUS
KIT5-1 Chorus Type page
Settings Refer to the separate Data List booklet.
Settings Refer to the separate Data List booklet.
KIT5-2 Chorus Return page
Settings 0 to 127
KIT5
≥≥≥≥≥CHORUS
KIT5-1≥≥ChoType=
G≥Chorus
1
KIT5-1-1≥≥≥<CHO>
LFOSpeed=0.000Hz
1
KIT5-2≥≥≥≥≥<CHO>
≥ChoReturn=≥64
1