Manual

To play a disc properly, you need to adjust the formats of audio and video signals output from this unit in accordance with the
equipment connected to this unit. See p.25 to 30 for mr)re detailed information.
]7p_IrlrJUff°2i_
• Be sure to select the appropriate positions at '7 Digital Audio Output' on the SETUP MENU. Otherwise, there may be
a case where digital signal which the connected equipment cannot process will be output and its noise could damage
your ears and your speakers.
• 6 TV Aspect
• 7 Digital Audio Output
• To output digital signal
from this unit
Type of the connected video monitor
Conventional _ype
Widescreen type
_i Appropriate setting
4:3
16:9
The connected audio
equipment has Corresponding item Appropriate setting
96-kHT/24-bit D/A converter I. PCM Down No
Conversion
Dolby Digital decoder 2. Dolby Digital Bitstream
DTS decoder 3. DTS Bitstream
MPEG decoder 4. MPEG [Europe and Bitstr_am
U.K. models only]
• When you selecl 'No' at I PCM Down Conversion, digital signal may not be output
depending on the disc yf_u play.
• Make sure to connect digda[ terminals of both this unit and the audio equipment as
instructed on page 9
item in '7 Digital Audio Output' Appropriate setting
I. PCM Dov, n Conversion No
2 Dl_lby Digital PCM
3 DTS Off
4. MPIEG [Etuope and U K. models onlyl PCM
• To output analog signal •
from this unit
• Ac]iust some other settings such as on-screen display language, ratings, etc. as necessary. See gETUP MENU (p.25 to 30)
for detail.
12